5. Product Dimensions(Custom Panel Installation → Pre-finished Panel Installation → Minimum Clearance Between Toe Kick Panel And Floor → Height Of Feet)
6. Custom Panel Dimensions(Custom Panel Considerations → Maximum Weight Of Door Panels Must Not Exceed 20lbs (9kg) → Installation Outside These Specifications May Result In Condensation On Cabinetry Surfaces. → Toe Kick Panel Height Can Be Determined By Using The Below:)
10. Hard Wiring (optional)(Refit Module Cover Before Sliding The Access Cover Back Into Place, Ensuring The 2 Clips Shown Are Fully Locked. → Before Refitting The Drawers, Ensure The Hoses Are Not Twisted And All Latches Are Facing Forward. → Refit The Drawer Back Onto The Runners, Ensure Both Runners Are Extended Halfway Before Lowering The Tub. Slide The Runners Forward To Engage.)
12. Push The Product Into The Cavity(Fit Custom Door Panels → Remove Both Side Pins From Each Drawer → Secure All Four Side Brackets To The Dishdrawer Dishwasher → Level The Dishdrawer Dishwasher)
13. Fit Custom Door Panels(Electric Shock Hazard: → Reconnect The Knock-to-pause Module → Re-check Clearances → Carefully Fit The Panels Onto The Product)
14. Secure To Cabinetry Via Brackets (method A)(Secure To Cabinetry Via Drawer Removal (method B) → Secure To Cabinetry Via All Four Fixing Locations In The Chassis. → Ensure Sound Insulation Is Replaced Correctly. → If Fitted, Secure The Two Top Brackets To The Cabinetry.)
15. Secure To Cabinetry Via Drawer Removal (method B)(Install Pre-finished Toe Kick → Before Refitting The Drawers, Ensure The Hoses Are Not Twisted And All Latches Are Facing Forward. → Carefully Score Toe Kick At Desired Height → Do Not Over Tighten The Screws.)
16. Install Custom Toe Kick(Align The Mounting Bracket To The Panel → Secure The Mounting Bracket To The Panel → Carefully Cut Or Router The Panel → Ensure All Panel Edges Are Sealed To Withstand Moisture)
Loading...
