Home > Frigidaire > FRIGIDAIRE FGHD2455LF Dishwasher
FRIGIDAIRE FGHD2455LF Dishwasher
OPERATI NG I NSTRUCTI ONS
1-24 hrs
heavy normal
wash wash
energy
saver
rinse
air
dry
hi temp
wash
china
crystal
delay
start
START
cancel
sanitize
hold to lock
washing clean sanitized
Appearance may vary from your model.
Getting Started
Hi-Temp Wash
1. Load dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Dishwasher Dispenser &
Detergents).
When HI-TEMPWASH option is selected, the dishwasher
heats water in the main wash to approximately 140oF
(60oC).
3. Add rinse aid, if needed (See Rinse Aid).
4. Close door to latch.
This increase in water temperature helps dishwasher
detergent remove food greast and soil from dishes more
effectively and aids in drying. HI-TEMPWASH option can
be used with all cycles except CHINA CRYSTAL (some
models) and RINSE& HOLD. HI-TEMPWASH is
automatically provided when HEAVYWASH cycle is
selected.
5. Select desired CYCLE (See Cycle Chart). The indicator
light above the pad will glow when selected.
6. Select desired OPTIONS(See Energy Options). The
indicator light above the pad will glow when selected.
7. Run hot water faucet nearest dishwasher until water is
hot. Turn water off.
8. To start, press START/CANCEL pad.
When HI-TEMPWASH option is selected, the light above
the pad will come on and remain on until end of cycle.
To turn off the HI-TEMPWASH option, press the pad a
NOTE
second time. The light above the pad will turn off.
The dishwasher is programmed to remember your last cycle
so you do not have to reset each time. To start the
dishwasher using the same cycle and options selected on
the previous wash, just press the START/CANCEL pad.
Air Dry
The unit defaults to heated dry when it is started with any
cycle selected. This drying uses a combination of the
heated dry with rinse aid that achieves enhanced drying
performance. If you prefer to only have AIR DRY for dishes,
you will select AIR DRY and the unit will not energize the
heating element. This will reduce energy consumption, but
reduce drying perfomance.
Wash Cycle Selections
Cycle times are approximate and will vary with options
selected. Hot water is necessary to activate dishwasher
detergent and melt fatty food soils. An automatic sensor will
check the incoming water temperature and, if it is not hot
enough, the timer will be delayed for automatic water
heating in the main wash of all cycles. This happens even
when HI-TEMPWASH option has not been selected. When
HI-TEMPWASH is selected, an even higher temperature will
be guaranteed to handle heavier soil loads.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle. Press
START/CANCEL pad and the dishwasher will start a 60
second drain. At the end of the drain, select the desired
cycle.
5
| General | Details |
|---|---|
| Name | FRIGIDAIRE FGHD2455LF Dishwasher |
| Make | Frigidaire |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.27 MB |

FRIGIDAIRE GDPH4525SS Dishwasher

FRIGIDAIRE GDPP4517A Gallery Series Dishwasher

FRIGIDAIRE FDPC4314AS Dishwasher

FRIGIDAIRE GDPH4515AF Gallery Dishwasher

FRIGIDAIRE FFBD2406NB Full Console Dishwasher

FRIGIDAIRE GDPH4525AF Gallery Dishwasher

FRIGIDAIRE FDHP4336AS 24 Tall Tub Dishwasher

FRIGIDAIRE FDHP4336AS Dishwasher

FRIGIDAIRE FDSR4501AP Panel Ready Dishwasher

FRIGIDAIRE FFBD1821MS Dishwasher

































