Home > HEINNER > HEINNER HDW-BI6006IE++ Free Standing Dishwasher

HEINNER HDW-BI6006IE++ Free Standing Dishwasher

V. INSTALLATION  
Machine positioning  
When positioning the machine, place it in an area where dishes can be easily loaded  
and unloaded. Do not put the machine in an area where the ambient temperature falls  
below 0°C.  
Read all warnings located on the packaging before removing the packaging and  
positioning the machine.  
Place the machine close to a water tap and drain. Take into consideration that the connections  
will not be altered once the machine is in position.  
Do not hold the machine by its door or panel.  
Leave an adequate distance around the machine to allow ease of movement when  
cleaning.  
Ensure the water inlet and outlet hoses are not squeezed or trapped and that the  
machine does not stand on the electrical cable while positioning.  
Adjust the feet so the machine is level and balanced. The machine should be placed on  
flat ground otherwise it will be unstable and the door of the machine will not close  
properly.  
Water connection  
We recommend fitting a filter to your water inlet supply in order to prevent damage to your  
machine due to contamination (sand, rust, etc.) from indoor plumbing. This will also help  
prevent yellowing and deposit formation after washing.  
If models are marked with 25°, the water temperature may be max. 25 °C (cold water).  
For all other models: Cold water preferred; hot water max. temperature 60 °C.  
Water inlet hose  
WARNING: Use the new water inlet hose supplied with your machine, do not use an old  
machine’s hose.  
WARNING: Run water through the new hose before connecting.  
WARNING: Connect the hose directly to the water inlet tap. The pressure supplied by the tap  
should be a minimum of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a  
pressure relief valve must be fitted between the connection.  
WARNING: After the connections are made, turn the tap on fully and check for water leaks.  
Always turn off the water inlet tap after a wash program has finished.  
An Aquastop water spout is available. Do not damage it or allow it to become kinked or  
twisted.  
6
GeneralDetails
NameHEINNER HDW-BI6006IE++ Free Standing Dishwasher
MakeHEINNER
LanguageEnglish
FiletypePDF (Download)
File size0.56 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
HEINNER HWDM-V9614D Front Load Dishwasher
HEINNER HWDM-V9614D Front Load Dishwasher
HEINNER HDW-BIM60514E Dishwasher
HEINNER HDW-BIM60514E Dishwasher
HEINNER HDW-FSM60714AWD Series Dishwasher
HEINNER HDW-FSM60714AWD Series Dishwasher
HEINNER HG-150SS Free Standing Dishwasher
HEINNER HG-150SS Free Standing Dishwasher
Heinner HDW-FS6062WE Dishwasher
Heinner HDW-FS6062WE Dishwasher
HEINNER HDW-BI4505IE++ Dishwasher
HEINNER HDW-BI4505IE++ Dishwasher

HEINNER HDW-BI6006IE++ Free Standing Dishwasher