Hotpoint H3B L626 B UK Dishwasher
TROUBLESHOOTING
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.
For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet.
Spare parts will be available for a period of either up to 7 or up to 10 years, according to the specific Regulation requirements.
PROBLEMS POSSIBLE CAUSES
SOLUTIONS
Salt reservoir is empty (after refill the salt indi- Refill reservoir with salt (for more information - see page 2).
cator may remain lit for several wash cycles).
Salt
indicator is lit
Adjust water hardness (see table, page 2).
Rinse aid dispenser is empty (after refill
the rinse aid indicator may remain lit for several Refill dispenser with rinse aid (for more information - see page 2).
wash cycles).
Rinse aid
indicator is lit
The appliance has not been plugged
Insert the plug into the socket.
in properly.
The dishwasher
won’t start or does
not respond
For safety reasons, dishwasher will not restart automatically when power
returns. Press the START/Pause button to resume the cycle.
Power outage.
to commands.
The dishwasher door is not closed.
Vigorously push the door until you hear the “click”.
Cycle is interupted by door opening for > 4 sec. Close the door and press the START/Pause button.
Switch off the appliance by pressing the ON/OFF button, switch it back
It does not respond to commands.
on after approximately one minute and restart the program. If problem
persists, unplug the appliance for 1 minute, then plug it back in.
The dishwasher
won’t drain.
The wash cycle has not finished yet.
The drain hose is bent.
Wait until the wash cycle finishes.
Check that the drain hose is not bent (see INSTALATION INSTRUCTION).
Clean the sink drain pipe.
The sink drain pipe is blocked.
The filter is clogged up with food residues.
The dishes are rattling against each other.
Clean the filter (see CLEANING THE FILTER ASSEMBLY).
Position the crockery correctly (see LOADING THE RACKS).
The dishwasher
makes excessive
noise.
The detergent has not been measured out correctly or it is not suitable
for use in dishwashers (see FILLING THE DETERGENT DISPENSER). Restart
dishwasher by pressing the DRAIN button (see OPTIONS AND FUNCTIONS)
and run new program without detergent.
An excessive amount of foam has been pro-
duced.
The dishes are not
clean.
The crockery has not been arranged properly. Arrange the crockery correctly (see LOADING THE RACKS).
The spray arms cannot rotate freely, being
Arrange the crockery correctly (see LOADING THE RACKS).
hindered by the dishes.
The wash cycle is too gentle.
Select an appropriate wash cycle (see PROGRAMS TABLE).
An excessive amount of foam has been pro-
duced.
The detergent has not been measured out correctly or it is not suitable
for use in dishwashers (see FILLING THE DETERGENT DISPENSER).
The cap on the rinse aid compartment has
not been shut correctly.
Make sure the cap of the rinse aid dispenser is closed.
The filter is soiled or clogged.
There is no salt.
Clean the filter assembly (see CARE AND MAINTENANCE).
Fill the salt reservoir (see FILLING THE SALT RESERVOIR).
No water in the water supply or the tap is
closed.
The dishwasher
does not fill the
water.
All LEDs are
blinking rapidly
Make sure there is water in the water supply or the tap running.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram
the dishwasher and reboot.
The inlet hose is bent.
The sieve in the water inlet hose is clogged;
it is necessary to clean it.
After having carried out the verification and cleaning, turn off and turn on
the dishwasher and restart a new program.
Dishwasher
finishes the cycle
prematurely.
Drain hose positioned too low or siphoning into Check if end of drain hose is placed at correct height (see INSTALLATION).Check
home sewage system.
for siphoning into home sewage system, install air admittance valve if necessary.
Air in water supply.
Check water supply for leaks or other issues letting air inside.
Policies, standard documentation, ordering of spare parts and additional product infor-
mation can be found by:
• Visiting our website docs.hotpoint.eu and parts-selfservice.whirlpool.com
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
When contacting our After-sales Service, please state the codes provided on your product’s
identification plate.
IEC 436
:
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identifier that can be used to consult the portal of the registry
400011688130
07/2023 dk - Xerox Fabriano
8
| General | Details |
|---|---|
| Name | Hotpoint H3B L626 B UK Dishwasher |
| Make | Hotpoint |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.05 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Hotpoint H7I HP42 L UK Dishwasher
Hotpoint H7F HP33 UK Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
Hotpoint H7F HS51 Dishwasher
Hotpoint H7FHS41 Dishwasher
Hotpoint HA3FC10BS7A0S Dishwasher
Hotpoint H7F HS41 X Dishwasher
Hotpoint 869991662940 Dishwasher
Hotpoint H7I HT59 L Dishwasher
BOSCH SMS6EMI65M Free Standing Dishwasher
BOSCH SMH6ZCX06E Fully Integrated Dishwasher
LG 66231551 Dishwasher
SHARP SDW6767HS Dishwasher
FOTILE BD3B-G6 Dishwasher
BOSCH SMV6ZCX16E Dishwasher
FISHER PAYKEL DD60DDFX9 Dishwasher
BOSCH SPV2HKX39E Dishwasher
BOSCH SMU4ECI14S Dishwasher
FISHER AND PAYKEL DD24SAX9 N Dish Drawer Dishwasher