Hotpoint H7F HP43 X UK 15 Place Setting Dishwasher

1

2

3

4

5

6

7

8

Daily Reference Guide  

EN  

Before using the appliance carefully read Safety  

and Installation Instructions. More information about your product  

available on website: docs.whirlpool.eu  

THANK YOU FOR BUYING A HOTPOINT PRODUCT.  

In order to receive a more complete assistance, please  

register your appliance on: www.hotpoint.eu/register  

After installation, please remember to remove all transport protection  

parts from the dishwasher.  

CONTROL PANEL  

1. ON-OFF/Reset button with indicator light  

2. PREVIOUS program button  

3. NEXT program button  

4. FAVOURITE program button with indicator light  

5. Salt reservoir empty indicator light  

6. Rinse Aid reservoir empty indicator light  

7. DESCALE indicator light  

8. Closed Water tap indicator light  

9. Key lock indicator light  

10. Program number and remaining time indicator  

11. Display  

12. Zone Wash 3D Option button with indicator light  

11  

12  

13  

1

2

3

4

5 6 7 8 9 10  

14  

15  

16  

13. Half Load Option button with indicator light/ Settings - 3 sec. press  

14. Extra Dry Option button with indicator light/ Keylock - 3 sec. press  

15. Delay Option button with indicator light  

16. START/Pause button with indicator light  

FIRST TIME USE  

SETTING MENU  

To change, follow instructions in section“SETTING MENU”.  

Only use salt that has been specifically designed for dishwashers.  

After the salt has been poured into the machine, the SALT REFILL indicator  

light switches off.  

1. Switch on the appliance by pressing the ON-OFF button.  

2. Hold the Settings (Half Load ) button for 3 seconds, until you hear  

a beep and the display shows„SEt”.  

If the salt container is not filled, the water softener and the heating  

element may be damaged as a result of limescale accumulation.  

Use of salt is recommended with any type of dishwasher detergent.  

3. After one second the first available setting (letter„h”) will be displayed.  

4. Press PREVIOUS /NEXT to scroll through the list of available settings  

(see table below), then press START/Pause to view and change the  

value of the currently selected setting.  

WATER SOFTENING SYSTEM  

5. Press PREVIOUS /NEXT to change the value, then press START/Pause  

to save the new value and return to the main menu.  

6. To change another setting, repeat points 4 and 5.  

Water softener automatically reduces water hardness, consequently preventing  

scale buildup on the heater, contributing also to better cleaning efficiency.  

This system regenerates itself with salt, therefore it is required to refill  

the salt container when empty. The frequency of regeneration depends  

on the water hardness level setting - regeneration takes place once per 4-6  

Eco cycles with the water hardness level set to 3. The regeneration process  

occurs at the beginning of the cycle with additional fresh water.  

7. Press ON-OFF or wait 30 seconds to exit the menu.  

VALUES  

(Default - in bold)  

LETTER  

SETTING  

Water Hardness Level  

(see “SETTING THE WATER HARDNESS”  

and “WATER HARDNESS TABLE”)  

•

•

•

Single regeneration consumes ~3L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

1 | 2 | 3 | 4 | 5  

Rinse Aid Level  

(see “ADJUSTING THE DOSAGE OF RINSE AID”)  

0 | 1 | 2 | 3 | 4 | 5  

1 | 0  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be  

filled when the RINSE AID REFILL indicator light in the control panel is lit.  

ActiveDry (see “OPTIONS AND FUNCTIONS”)  

“1”= On, “0”= Off  

1. Open the dispenser  

pressing and pulling up the  

tab on the lid.  

B

by  

Sound  

“1”= On, “0”= Off  

1 | 0  

2. Pour in the rinse aid (max.110  

ml), making sure it does not  

overflow from the dispenser.  

If this happens, clean the spill  

immediately with a dry cloth.  

Factory Settings  

Press START/Pause to restore to the factory  

default all the values of the settings included  

in the settings menu.  

-

A

B

FILLING THE SALT RESERVOIR  

The use of salt prevents the formation of LIMESCALE on the dishes and on  

the machine’s functional components.  

The salt reservoir is located in the lower part of the dishwasher (under the  

lower rack on the left side).  

3. Press the lid down until you hear a click to close it.  

NEVER pour the rinse aid directly into the appliance tub.  

ADJUSTING THE DOSAGE OF RINSE AID  

If you are not completely satisfied with the drying results, you can adjust  

•

•

•

It is mandatory that the salt reservoir never be empty.  

It is important to set the water hardness.  

Salt must be filled when the SALT REFILL indicator light  

panel is lit.  

the quantity of rinse aid used.  

To change, follow instructions in the section “SETTING MENU”.  

If the rinse aid level is set to ZERO, no rinse aid will be supplied. The LOW  

RINSE AID indicator light will not be lit if you run out of rinse aid.  

A maximum of 6 levels can be set according to the dishwasher model.  

• If you see bluish streaks on the dishes, set a low number (0-3).  

• If there are drops of water or limescale marks on the dishes, set  

a mid-range number (4-5).  

on the control  

1. Remove the lower rack and unscrew the reservoir cap  

(anticlockwise).  

2. Position the funnel (see figure) and fill the salt reservoir  

right up to its edge (approximately 0,5 kg); it is not un-  

usual for a little water to leak out.  

3. Only the first time you do this: fill the salt reservoir  

with water.  

FILLING THE DETERGENT DISPENSER  

To open the detergent dispenser use the opening device C. Introduce  

the detergent into the dry dispenser D only. Place the amount of  

detergent for pre-washing directly inside the tub.  

1. When measuring out the detergent refer to the  

mentioned earlier information to add the proper  

quantity. Inside the dispenser D, there are indica-  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly so that no detergent can get into  

the container during the wash program (this could damage the water  

softener beyond repair).  

Run a program every time as soon as you completed refilling the salt  

reservoir to avoid corrosion.  

D

tions to help the detergent dosing.  

2. Remove detergent residues from the edges of the  

dispenser and close the cover until it clicks.  

3. Close the lid of the detergent dispenser by pulling  

it up until the closing device is secured in place.  

C

SETTING THE WATER HARDNESS  

To allow the water softener to work in a perfect way, it is essential that the water  

hardness setting is based on the actual water hardness in your house. This infor-  

mation can be obtained from your local water supplier. The factory setting is“3”.  

See„WATER HARDNESS TABLE”.  

The detergent dispenser automatically opens up at  

the right time according to the program.  

Usage of detergent not designed for dishwashers may cause  

malfunction or damage to the appliance.  

Water Hardness Table  

°dH  

German degrees  

°fH  

French degrees  

°Clark  

English degrees  

Level  

1 (Soft)  

0 - 6  

7 - 11  

0 - 10  

11 - 20  

21 - 29  

30 - 60  

61 - 90  

0 - 7  

8 - 14  

2 (Medium)  

3 (Average)  

4 (Hard)  

12 - 16  

17 - 34  

35 - 50  

15 - 20  

21 - 42  

43 - 62  

5 (Very hard)  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Hotpoint H7F HP43 X UK 15 Place Setting Dishwasher
Make	Hotpoint
Language	English
Filetype	PDF (Download)
File size	6.66 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Hotpoint

Hotpoint H7F HP43 X UK 15 Place Setting Dishwasher Overview

Summary of Contents

• Page 1: Daily reference guide Before using the appliance, carefully read safety and installation instructions. Thank you for buying a Hotpoint product. After installation, please remember to remove all transport protection parts from the dishwasher. Control panel includes various buttons such as ON-OFF/Reset, Previous program, Next program, and more. Only use salt that has been specifically designed for dishwashers. Water softener automatically reduces water hardness, preventing scale buildup on the heater. Rinse aid makes dish drying easier and should be filled when the Rinse Aid Refill indicator light is lit. It is mandatory that the salt reservoir never be empty. To allow the water softener to work effectively, the water hardness setting must be based on the actual water hardness in your house. Usage of detergent not designed for dishwashers may cause malfunction or damage to the appliance.
• Page 2: Check that the dishwasher is connected to the water supply and that the tap is open. If a wrong program was selected, it is possible to change it, provided that it has only just begun. Press the ON/OFF button to switch on the dishwasher. Open the door slightly to avoid water splashing out and place the crockery inside the dishwasher. Select the most appropriate program in accordance with the type of crockery and its soiling level. If the door is opened during the wash cycle, the cycle stops. Start the wash cycle by closing the door and pressing the START/Pause button. The end of the wash cycle is indicated by beeps and by the flashing of the wash cycle number on the display. Before loading the baskets, remove all food residues from the crockery. Run a high-temperature program at least once a month to avoid odour and sediment in the dishwasher.
• Page 3: Daily Reference Guide Programs table Eco 50° - Program is suitable to clean normally soiled tableware, that for this use, it is the most efficient program in terms of its combined energy and water consumption. Auto Intensive 65° - Automatic program for heavily soiled dishes and pans. Senses the level of soiling on the dishes and adjusts the program accordingly. Auto Mixed 55° - Automatic program for normally soiled dishes with dried food residues. Good Night 50° - Suitable for night-time operation of the appliance. Ensures optimal cleaning and drying performance with the lowest noise emission. Sanitizing 65° - Normally or heavily soiled crockery, with additional antibacterial wash. Can be used to perform maintenance of the dishwasher. Soak - Use to refresh crockery planned to be washed later. No detergent is to be used with this program. Self-Clean 65° - Program to be used to perform maintenance of the dishwasher, to be carried out only when the dishwasher is EMPTY using specific detergents designed for dishwasher maintenance. Pre-treatment of the dishes is not needed before any of the programs. Options can be selected/deselected after choosing the program, directly by pressing the corresponding button. Half Load - If there are not many dishes to be washed, Half Load is used to save water, electricity, or time depending on the selected program.
• Page 4: Capacity: 15 standard place-settings Loading the racks includes foldable flaps with adjustable positions. The cutlery rack allows for separate arrangement of cutlery for easier collection and improved washing performance. Knives and sharp utensils should be positioned with blades facing downwards. The lower rack is designed for pots, lids, plates, and salad bowls, with tip-up supports for versatile loading. The upper rack is for delicate and light dishes, with tip-up supports for different arrangements. Zone Wash 3D uses additional water jets for intensive washing of heavily soiled items. The height of the upper rack can be adjusted for better loading efficiency. Regularly clean the filter assembly to prevent clogging and ensure proper water flow. The filter assembly consists of three filters that remove food residues from washing water.
• Page 5: The lower spray arm may be removed by pulling it upwards and rotating it anti-clockwise. Cleaning the spray arms is recommended to prevent food residue from blocking the holes. The top spray arm may be removed by pressing it up and rotating it anti-clockwise. In case your dishwasher doesn’t work properly, check the troubleshooting list. Spare parts will be available for a period of either up to 7 or up to 10 years. If the salt indicator is lit, refill the reservoir with salt. The rinse aid indicator being lit means the rinse aid dispenser is empty. Descale the appliance immediately if the descale indicator is lit or blinking. The dishwasher won’t start if it is not plugged in properly or if the door is not closed. Clean the filter and descale the appliance if the dishwasher won’t drain.
• Page 6: The dishwasher does not fill with water. Make sure there is water in the water supply and the water tap is open. The water inlet hose is kinked. Check the inlet hose. The screen in the water inlet hose is clogged. Check and clean the screen in the water inlet hose. The dishwasher finishes the cycle prematurely. Clean the filter and descale the appliance. The detergent has not been measured out correctly. Check if the end of the drain hose is placed at the correct height. The dishes are not dried well. Make sure the rinse aid dispenser is filled. The dishes have been unloaded before the actual cycle end. It is recommended to let the dishes sit inside the dishwasher with the door open for additional drying. The selected cycle does not have the drying phase. Change cycle selection for one that has the drying phase. Rinse aid dosage is excessive. Adjust the dosage to a lower setting. The salt reservoir is empty. Refill the reservoir with salt as soon as possible.
• Page 7: Page 7
• Page 8: Page 8