Home > INFINITON > INFINITON DIW-G61N, DIW-G62W Dishwasher

INFINITON DIW-G61N, DIW-G62W Dishwasher

For optional  
Water hardness table  
Water hardness  
Dishwasher Features  
2. Set value can be found in the water hardness table.  
3. Close the door.  
4. Switch on on/off switch.  
Set value on  
the machine  
Mmol/l  
7
8
2
Front View  
5. Hold down " Delay " button and press " Program "  
button for 5 seconds.The buzzer rings one  
time and H..  
flashes on the digital dis play.(factory setting is H4)  
To change the setting:  
Clark Range  
0-8  
soft  
soft  
0-1.1  
H0  
H1  
H2  
1 Upper Basket  
2 Spray Arms  
9-10  
1.2-1.4  
1
3
11-12 medium 1.5-1.8  
13-15 medium 1.9-2.1  
16-20 medium 2.2-2.9  
3 Lower Basket  
4 Water Softener  
5 Detergent Dispenser  
6 Rinse Aid Dispenser  
7 Cutlery Tray  
1. Press " Delay " button.  
H3  
Each time the button is pressed, the set value  
increasesby one level;when the value of H7 has  
been reached, the display jumps back to H0(off).  
H4  
H5  
H6  
H7  
21-26  
27-38  
39-62  
hard  
hard  
hard  
3.0-3.7  
3.8-5.4  
5.5-8.9  
2. Press " Program " button. The chosen setting  
4
5
has now been stored.  
6
8 Cup Holder  
B. Loading the Salt into the Softener  
Always use salt intended for use with dishwasher.  
NOTE: If your model has no water softener, you may skip this section  
4Prior Using for the First Time  
Before using your dishwasher for the first time:  
A. Set the water softener  
WATER SOFTENER  
The hardness of the water varies from place to place. If hard water is used in the  
dishwasher, deposits will form on the dishes and utensils.  
The appliance is equipped with a special softener that uses salts specifically  
designed to eliminate lime and minerals from the water.  
B. Pour 500ml of water inside the salt container and then fill with dishwasher salt  
C. Fill the rinse aid dispenser  
D. Function of detergent  
The salt container is located beneath the lower basket and should be filled as follows:  
Attention!  
Only use salt specifically designed for use in dishwashers! All other types of salt not specifically  
designed for use in a dishwasher, especially table salt, will damage the water softener. In case of  
damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is  
liable for any caused damages.  
A. Set the Water Softener  
The water softener is designed to remove minerals and salts from the water, which would have a  
detrimental or adverse effect on the operation of the appliance. The higher the content of these  
minerals and salts, the harder the water is. The softener should be adjusted according to the  
hardness of the water in your area. Your local Water Authority can advise you on the hardness of  
the water in your area.  
Only fill with salt just before starting one of the complete washing programmes.  
This will prevent any grains of salt or salty water, which may have been split, remaining on the  
bottom of the machine for any period of time, which may cause corrosion.  
After the first wash cycle the control panel light expires.  
Setting  
The amount of salt dispensed can be set from H0 to H7.  
Salt is not required at the set value H0.  
1. Find out about the hardness value of your tap water. Your water utility company will help you  
with this.  
2. Set value can be found in the water hardness table.  
3. Close the door.  
4. Switch on "Power" switch.  
5. Hold down " Delay" button and then press "Program" button for 5 seconds.The buzzer rings  
one time and H..  
1
2
A. Remove the lower basket and then unscrew and remove the cap from the salt container.  
flashes on the digital display.(factory setting is H4)  
1
B. If you are filling the container for the first time, fill 2/3 of its volume with water (around 500ml). 2  
7
6
GeneralDetails
NameINFINITON DIW-G61N, DIW-G62W Dishwasher
MakeINFINITON
LanguageEnglish
FiletypePDF (Download)
File size2.69 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

INFINITON DIW-G61N, DIW-G62W Dishwasher