GAGGENAU DF480801 Dishwasher

1

2

en  

Before using for the first time, read the instruction manual and the safety information it contains.  

Setting up Home Connect  

Overview of water hardness settings  

Setting the water softening sys-  

tem  

Technical data  

You can find an overview of the  

water hardness values that can  

be selected here.  

A table of country-specific units  

can be found in the instruction  

manual.  

The specified values are laboratory  

measurements taken in accordance  

with GB 38383, ECO program.  

Medium  

Medium  

Medium  

Hard  

Hard  

Hard  

1.5 - 1.8  

1.9 - 2.1  

2.2 - 2.9  

3.0 - 3.7  

3.8 - 5.4  

5.5 - 8.9  

11 - 12  

13 - 15  

16 - 20  

21 - 26  

27 - 38  

39 - 62  

Tip: Connect your appliance to a mobile device. You can con-  

veniently change all settings using the Home Connect app.  

1. Press  

.

2. To open the basic settings, press  

for approx. 3 seconds.  

3. Press repeatedly until the display  

shows "Water hardness".  

1. Install the Home Connect app on your mo-  

bile device and follow the instructions.  

Grade  

1

Power consumption  

[kW•h/cycle]  

Water consumption  

[L/cycle]  

0.730  

4. Press  

or  

repeatedly until the  

Hardness mmol/l  

range  

Setting  

value  

10.0  

right water hardness has been set.  

5. To save the settings, press  

prox. 3 seconds.  

for ap-  

Cleaning index  

Drying index  

Noise¹  

1.22  

1.12  

42  

Soft  

Soft  

0 - 1.1  

1.2 - 1.4  

0 - 8  

9 - 10  

2. Scan the QR code with the Home Connect  

app.  

[dB (A)]  

Energy efficiency index 43  

Water efficiency index 38  

Place settings  

15  

99.99%  

Sterilization rate²  

1

Adding special salt  

Basis for test: GB/T 4214.3  

Basis for test: QB/T 5133  

2

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

The sterilization function meets the  

relevant requirements of QB/T 1520  

during the life cycle.  

Types of bacteria removed and rate  

of bacteria removed see enterprise  

advertisement materials.  

4. Place the lid back on the dispenser and turn to  

close.  

Instruction for test institutes  

Laboratory data measured according  

to national standard GB38383 using  

only the ECO program ("Eco drying"  

off).  

Adding rinse aid  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

of the dispenser for rinse  

2

To deactivate the "Eco drying" func-  

tion, proceed as follows: Switch on  

aid  

and lift  

.

the appliance -> long press  

->  

max  

open basic settings -> press or to  

go to the Eco drying setting page ->  

1

press  

or  

to turn off the function  

to save.  

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

-> long press  

Test institutes receive the information  

for comparability tests (e.g. loading,  

detergent, noise measurement setup  

etc.).  

Request by e-mail to:  

Adding detergent  

dishwasher_test_cn@bshg.com  

The product number (E no.) and the  

production number (FD) are required  

which you can find on the rating plate  

of appliance inner door.  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

50 mL  

25 mL  

15 mL  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

approx. 4 seconds.  

The programme is cancelled and ends after ap-  

prox. 1 minute.  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

.

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	GAGGENAU DF480801 Dishwasher
Make	Gaggenau
Language	English
Filetype	PDF (Download)
File size	0.45 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Gaggenau

GAGGENAU DF480801 Dishwasher Overview

Summary of Contents

• Page 1: Before using for the first time, read the instruction manual and the safety information it contains. Overview of water hardness settings. You can find an overview of the water hardness values that can be selected here. Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app. To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts. The sterilization function meets the relevant requirements of QB/T 1520 during the life cycle. Adding rinse aid: Add rinse aid up to the max mark of the dispenser for rinse aid. Test institutes receive the information for comparability tests. How to use your appliance: Load the tableware, add detergent, switch on the appliance, select the programme, and start the programme. Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware.
• Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system. Clean the filter elements under running water. Re-assemble the filter system. Check the outlet nozzles on the spray arms for blockages. Insert the upper spray arm and screw it firmly in place. Troubleshooting E:3200 or indicator for water supply lights up. Supply hose is kinked. Wastewater pump is blocked. Filters are soiled or blocked. Remnants of food on tableware. Spray arm rotation is blocked. Electronics have detected a fault.