Kenmore 263.1460 Dishwasher
Using detergent pacs
4 BEFORE USING THE APPLIANCE
These products should be used according to the
manufacturer’s instructions.
Never put detergent pacs into the interior
section or the cutlery basket.
Detergent pacs contain not only the detergent
but also rinse aid, salt replacement substances
and additional components depending on the
combination.
We recommend you do not use detergent pacs
in short cycles. Please use powder or liquid
detergents instead of detergent pacs in short
cycles.
Preparing your dishwasher for first use
•
Make sure the electricity and supply water
specifications match the values indicated in
the installation instructions for the machine.
•
•
Remove all packaging material inside the
machine.
Fill the rinse aid compartment.
Detergent usage
Only use detergents specifically designed for
domestic dishwashers. Store detergents in cool,
dry places out of reach of children.
Add the proper detergent for the selected cycle
to ensure the best performance. The amount of
detergent needed depends on the cycle, load
size, and soil level of dishes.
If you encounter problems when using detergent
pacs, please contact the detergent manufacturer.
When you stop using detergent pacs, make sure
that rinse aid setting is set to the correct level.
Rinse-aid usage
The rinse aid helps to dry the dishes without
streaks and stains. Rinse aid is required for
stain-free utensils and clear glasses. The rinse
aid is automatically released during the hot
rinse phase. If rinse aid setting is too low, whitish
stains remain on dishes and dishes do not dry or
wash clean.
Do not overfill the detergent compartment.
Using too much detergent can cause
discoloration on glasses and dishes and glass
corrosion. Continued use of too much detergent
may cause machine damage.
Using too little detergent can result in poor
cleaning and whitish streaks, especially in hard
water.
See the detergent manufacturer’s instructions for
a further information.
If rinse aid setting is too high, bluish layers on
glasses and dishes may be seen.
Filling the rinse-aid and setting
To fill the rinse aid compartment, open the rinse
aid compartment cap. Fill the compartment
with rinse aid to the MAX level and then close
the cap. Be careful not to overfill the rinse aid
compartment and wipe up any spills.
In order to change the rinse aid level, follow
the below steps
Filling the detergent
Push the latch to open the dispenser and pour in
the detergent.
Close the lid and press it until it locks in place.
The dispenser should be refilled just before the
start of each cycle. If the dishes are heavily
soiled, place additional detergent in the pre-
•
Turn on the machine by pressing the Power
button.
wash detergent chamber.
•
Press the Cycles button for at least 5
seconds immediately after the machine is
turned on.
DETERGENT
•
Release the Cycles button when “rA”
is shown. Next, the last setting level is
displayed.
•
•
Set the level by pushing the Cycles button.
Switch off the machine to save the setting.
USA - CAN - 14
| General | Details |
|---|---|
| Name | Kenmore 263.1460 Dishwasher |
| Make | Kenmore |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.66 MB |

Kenmore 14041 Automatic Dishwasher

Kenmore 665.15822000 Undercounter Dishwasher

Kenmore 665.1605 Ultra Wash Dishwasher

Kenmore 665.15632 Ultra Wash Dishwasher

Kenmore 665.15624000 Undercounter Dishwasher

Kenmore 665.15824000 Undercounter Dishwasher

Kenmore 587.141500 Dishwasher

Kenmore W10898468B Ultra WashTMHE Dishwasher
















































