Home > KitchenAid > KitchenAid w11323304 Dishwasher
KitchenAid w11323304 Dishwasher
LOCATION REQUIREMENTS
For Direct Wire
For Power Cord
Dishwasher must be fully enclosed (top, sides, back, and floor)
upon installation. A side panel kit is available from your dealer for
installing your dishwasher at the end of your cabinetry.
An optional moisture barrier accessory is also available for
installing underneath a wooden countertop.
Check location where dishwasher will be installed. The location
must provide:
■ Convenient access for loading and unloading dishes. Corner
locations require a 2" (5.1 cm) minimum clearance between
the side of the dishwasher door and the wall or cabinet.
■ Easy access to water, electricity, and drain:
■ Grounded electrical supply is required.
■ This dishwasher has a water heating feature and also
requires a connection to a hot water supply line.
■ Make sure pipes, wires and drain hose are within the
shaded area shown in the “Product and Cabinet Opening
Dimensions” section.
■ Do not run drain lines, water lines, or electrical wiring where
they can interfere with or contact dishwasher motor or legs.
Cabinet Grommet
For 11/2" (38 mm) hole in
cabinet.
NOTE: Required for metal
cabinets.
Power Cord Kit
Kit typically includes
power cord, metallic strain
relief, grommet.
(Whirlpool Part Number
Cord Kit - Straight -
W11365011
Cord Kit - Right Angle -
W11365014)
■ Shelter dishwasher and water lines leading to dishwasher
against freezing. Damage from freezing is not covered by the
warranty.
Call us at our toll-free number or visit the brand website listed in
the Quick Start Guide for accessory and part information.
NOTE: If dishwasher will be left unused for a period of time
or in a location where it may be subject to freezing, have it
winterized by authorized service personnel.
■ If installed in new construction, flush the water supply line of
debris before connecting it to the fill valve. If it is not flushed,
debris from the water supply could plug the fill valve screen.
NOTE: Be sure to purchase only Whirlpool factory-certified
parts and accessories for your appliance. Your installation may
require additional parts. To order, refer to the contact information
referenced in your Quick Start Guide.
■ A square opening for proper operation and appearance.
■ The cabinet front to be perpendicular to floor.
■ Level floor.
Helpful Tip: If floor at front of opening is not level with floor at
rear of opening, shims may be used to level dishwasher.
NOTE: To avoid shifting during dishwasher operation, shims
must be securely attached to the floor.
■ The location where the dishwasher will be installed must
provide clearance between motor and flooring. Motor should
not touch the floor.
■ Do not install dishwasher over carpeted flooring.
10
| General | Details |
|---|---|
| Name | KitchenAid w11323304 Dishwasher |
| Make | KitchenAid |
| Language | English |
| Filetype | PDF (Download) |
| File size | 12.18 MB |
(1 votes, average: 5.00 out of 5)
Loading...
KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher
KitchenAid KDTF324PPA Dishwasher
Kitchenaid MVWC565FW1 Dishwasher
KitchenAid KDFE104KWH Two Rack Dishwasher
KitchenAid KDTE104KPS Dishwasher
KitchenAid KDFE104KBL Front Dishwasher
KitchenAid KDTF924PPS Flush Cabinet Dishwasher
KitchenAid KDTE304RBS Level Jet Rack Dishwasher
KitchenAid KDF Series Dishwasher
KitchenAid W11589937B Dishwasher
Miele G7130au Dishwasher
FISHER PAYKEL DW60U2I2 Dishwasher
Electrolux ESA47300UW Dishwasher
BOSCH SMS4IKI51T Dishwasher
EdgeStar DWP63BL Dishwasher
EVERDURE DWC066WE 55cm 6 Place Settings Free Standing Dishwasher
FISHER AND PAYKEL DD60DCX9 7 Contemporary Dishwasher
FISHER PAYKEL DD24DCHTX9N Sanitize Dishwasher
Midea MDT24X2APR Dishwasher
Maidaid Halcyon AMH51 Amika Drain Pump Dishwasher