Home > KitchenAid > KitchenAid w11323304 Dishwasher
KitchenAid w11323304 Dishwasher
DISHWASHER LOADING TIPS
NOTE: Features are model specific. Your dishwasher may not have all features described. See Quick Start Guides for possible
dishwasher loading patterns for all dish racks.
Silverware Baskets
Sliding Bowl Tines
Style 1
Style 3
The sliding bowl tines allow you to easily load bowls of multiple
sizes. Grab the moveable tine row in the lower rack and slide into
the desired position.
Style 2
Fold Down Tines
Use silverware basket lids to provide optimal spacing and best
cleaning performance.
NOTE: If your silverware does not fit into the designated slots,
open the lids (Style 1/3) or lift on the ends of the lids and pull to
remove (Style 2). Mix silverware types to keep them separated.
Load knives down, forks up, and alternate spoons for best
cleaning results.
Removing Upper Racks
In order to make space for tall items, your upper racks are
removable. The manner in which to remove will depend on
whether the rack is mounted with Style 1 or Style 2. Remove
dishes prior to removing any racks.
Fold down tines allow you to optimize the spacing in the rack.
Fold down tines might be in the lower rack, the second level rack
and/or third level rack depending on your model. To fold or unfold
the tine, hold the tine nearest the clip at the end of the tine row
and gently push it past the stop on the clip and in the direction
you want to fold it.
Stemware Holder
Use the stemware holders to support wine glasses and other
stemware. Push them up to rotate them out of the way when not
needed.
Style 1
To remove the rack, pull the rack forward about halfway out of
the tub. On one side, press the tab on the track in and pull up
the front end of the rack, out of the track. Then repeat this step
on the other side to completely remove the front end of the rack.
Then remove the rack by pulling the back end out using a forward
and upward motion.
Stemware
Holder
To replace the rack, Push back of rack into rail first and then push
front down.
Rack
Cup Shelf
Track Stop
Style 2
To remove the rack, pull the rack out until it stops. On the left and
right side of the rack, push the plastic track stops on the front of
the rail sideways to open them. Pull out the rack.
To replace the rack, push the rack back onto the rails. Push the
track stops closed.
Use the cup shelf to hold additional cups or small items. Push up
to fold out of the way when not needed.
4
| General | Details |
|---|---|
| Name | KitchenAid w11323304 Dishwasher |
| Make | KitchenAid |
| Language | English |
| Filetype | PDF (Download) |
| File size | 12.18 MB |
(1 votes, average: 5.00 out of 5)
Loading...
KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher
KitchenAid KDTF324PPA Dishwasher
Kitchenaid MVWC565FW1 Dishwasher
KitchenAid KDFE104KWH Two Rack Dishwasher
KitchenAid KDTE104KPS Dishwasher
KitchenAid KDFE104KBL Front Dishwasher
KitchenAid KDTF924PPS Flush Cabinet Dishwasher
KitchenAid KDTE304RBS Level Jet Rack Dishwasher
KitchenAid KDF Series Dishwasher
KitchenAid W11589937B Dishwasher
BOSCH 041203 Dishwasher
FISHER AND PAYKEL DD60SCHX9 Single DishDrawer Dishwasher
FISHER and PAYKEL DD60D4HNB9 Contemporary Dishwasher
FRIGIDAIRE GDPH4515AF Gallery Dishwasher
Whirlpool W10903644A Dishwasher
BOSCH SMU4HTW02H Dishwasher
Haier HDW15F3S1 Dishwasher
DeLonghi 555 1240 mm Dishwasher
SIEMENS SN23EI14CE Dishwasher
KitchenAid KUDS24SEWH2 Dishwasher