Home > KitchenAid > KitchenAid w11323304 Dishwasher
KitchenAid w11323304 Dishwasher
ERROR CODES
ERROR CODES / BLINKING LIGHTS
Code Shown on
Front Panel LED*
(# blinks, Pause,
# blinks)
Code Shown
(7 Seg Display)
Issue
What will happen?
What to do?
(if present)
Turn off water to unit (if possible).Turn
off power to unit. If the water cannot
be turned off, DO NOT turn off power
and keep door closed. Press Cancel
key one time to silence alarm tone. Call
service.
Drain sequence
will begin, machine
operation will be
prevented
Dishwasher fails
to operate fill valve
correctly
1 Pause 1 Pause -
pause, repeat
F1E1
Motor controller
failure
1 Pause 2 Pause,
repeat
F1E2
H2O
Cycle ends
Call service
Ensure fill hose is connected to
product. Ensure water supply is turned
ON. Press Start to resume cycle. If
alarm still present, call service.
No water present at
dishwasher
8 Pause 1 Pause -
pause, repeat
Cycle is paused
7 Pause 1 Pause,
repeat/7 Pause 2
Pause, repeat
Wash motor failure
F7E1/F7E2
Cycle ends
Call service
For Professional Installers
Turn off water to unit (if possible). Turn
off power to unit. If the water cannot
be turned off, DO NOT turn off power
and keep door closed. Press Cancel
key one time to silence alarm tone. Call
service.
For Self Installers
■ Press CANCEL button twice or cycle
power. This may clear the issue.
■ Check to see if the wire connector is
connected to the float switch on the
drip tray. See step 46. If the wire is
off, reconnect and then hit the cancel
button twice.
■ Check to see if there is any water in
the drip tray. If water is in the drip
tray, remove the water and reinstall
the drip tray. Make sure to connect
the wiring to the float. Step 46.
Drain sequence
will begin, machine
operation will be
prevented
Dishwasher
overfills
8 Pause 4 Pause -
pause, repeat
F8E4
Check to see where water may have
leaked into the drip tray. (Check the
water inlet fittings in steps 15 and 16
to see if they are leaking)
■ If water was in the tray and no leaks
were found, run the product on the
shortest installation cycle while
checking for leaks. The access panel
should be off to observe any leaks.
■ If problem still exists, call for service.
Turn off water to unit (if possible).Turn
off power to unit. If the water cannot
be turned off, DO NOT turn off power
and keep door closed. Press Cancel
key one time to silence alarm tone. Call
service.
Drain sequence
will begin, machine
operation will be
prevented
8 Pause 5 Pause -
pause, repeat
Fill valve stuck on
F8E5
F9E1
If drain hose is connected to a garbage
disposal, confirm that drain hose is not
clogged and disposal plug has been
knocked out. If unit still will not drain,
call service.
Dishwasher will not
drain
9 Pause 1 Pause -
pause, repeat
Cycle ends
Cycle ends
Water present
under dishwasher
10 Pause 5 Pause -
pause, repeat
FAE5
F6E1
Call service.
User interface
service
communication
fault
6 Pause 1 Pause -
pause, repeat
Product will not able to
start or resume cycles
Call service.
7
| General | Details |
|---|---|
| Name | KitchenAid w11323304 Dishwasher |
| Make | KitchenAid |
| Language | English |
| Filetype | PDF (Download) |
| File size | 12.18 MB |

KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher

KitchenAid KDTF324PPA Dishwasher

Kitchenaid MVWC565FW1 Dishwasher

KitchenAid KDFE104KWH Two Rack Dishwasher

KitchenAid KDTE104KPS Dishwasher

KitchenAid KDFE104KBL Front Dishwasher

KitchenAid KDTF924PPS Flush Cabinet Dishwasher

KitchenAid KDTE304RBS Level Jet Rack Dishwasher

KitchenAid KDF Series Dishwasher

KitchenAid W11589937B Dishwasher





































































































