Home > KitchenAid > KitchenAid w11323304 Dishwasher

KitchenAid w11323304 Dishwasher

INSTALLATION INSTRUCTIONS  
Drill a 11 (3.8 cm) drain hose hole in the side or rear of cabinet,  
"
depending on location of drain hose routing and drain hose  
connection location.  
WARNING  
Drill a 1/2" (1.27 cm) water supply hose hole in the side or rear  
of cabinet, depending on location of water supply routing and  
connection location  
Drill a 11" (3.8 cm) electrical conduit hole in the right-hand side  
or rear of cabinet.  
Electrical Shock Hazard  
Disconnect electrical power at the fuse box or circuit  
breaker box before installing dishwasher.  
1. Sand holes smooth  
Failure to do so can result in death or electrical shock.  
Metal  
Cabinet  
1. Video Installation  
Wood  
Cabinet  
Video of installation steps can be found online at  
whirlpool.com in the “Service & Support” section “How To’s  
and FAQ. The video can be found at  
Wood cabinet: Sand the hole until smooth.  
2. Disconnect power  
Metal cabinet: Cover edges of hole with grommet included with  
power cord kit.  
Disconnect electrical power at the fuse box or circuit  
breaker box before installing dishwasher.  
Helpful Tip: Wiring the dishwasher will be easier if you route  
the cable into the cabinet opening from the right-hand side.  
INSTALL OPTIONAL MOISTURE BARRIER -  
RECOMMENDED FOR WOOD COUNTERTOPS  
3. Shut off water supply  
Shut off the water supply to the dishwasher.  
Moisture barrier/wood shims  
PREPARE CABINET OPENING—  
NEW UTILITIES  
Moisture  
barrier  
4. Drill hole locations—new construction  
Install  
wood  
shims  
Optional  
location  
Preferred  
location  
11"  
(3.8 cm)  
1/2"  
(1.27 cm)  
Make sure the area under the cabinet is clean and dry for  
installation of the moisture barrier. Remove the backing of the  
moisture barrier, and apply to underside of the countertop along  
the front edge of the counter.  
NOTE: The use of this moisture barrier is recommended but not  
required.  
NOTE: Install wood shims if side anchoring and the gap between  
the sides of the cabinet and sides of the dishwasher are greater  
than 1/2" (1.27 cm) on each side or are greater than the length of  
the side anchor screws.  
The power-supply receptacle for the appliance shall be installed  
in a cabinet or on a wall adjacent to the undercounter space in  
which the appliance is to be installed.  
NOTE: Refer to the “Product and Cabinet Opening Dimensions”  
section for the correct hole placement and dimensions of the  
shaded area.  
13  
GeneralDetails
NameKitchenAid w11323304 Dishwasher
MakeKitchenAid
LanguageEnglish
FiletypePDF (Download)
File size12.18 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher
KitchenAid KDTE304RBS Third Level Jet Rack Dishwasher
KitchenAid KDTF324PPA Dishwasher
KitchenAid KDTF324PPA Dishwasher
Kitchenaid MVWC565FW1 Dishwasher
Kitchenaid MVWC565FW1 Dishwasher
KitchenAid KDFE104KWH Two Rack Dishwasher
KitchenAid KDFE104KWH Two Rack Dishwasher
KitchenAid KDTE104KPS Dishwasher
KitchenAid KDTE104KPS Dishwasher
KitchenAid KDFE104KBL Front Dishwasher
KitchenAid KDFE104KBL Front Dishwasher
KitchenAid KDTF924PPS Flush Cabinet Dishwasher
KitchenAid KDTF924PPS Flush Cabinet Dishwasher
KitchenAid KDTE304RBS Level Jet Rack Dishwasher
KitchenAid KDTE304RBS Level Jet Rack Dishwasher
KitchenAid KDF Series Dishwasher
KitchenAid KDF Series Dishwasher
KitchenAid W11589937B Dishwasher
KitchenAid W11589937B Dishwasher

KitchenAid w11323304 Dishwasher