medion DWT20 mini Dishwasher
420
435
Fig. 5 – Connecting the water hose
Connect the water supply hose (25) to a cold water tap
with a 3/4”thread (see Fig. 5).
You can connect the supply hose to a hot water tap if the
water temperature does not exceed 60°C. This reduces
wash time by about 15 minutes.
Fig. 4 – Appliance dimensions
Screw the hose connection hand tight.
The water hose is designed for a water pressure of approx.
10 bar. We recommend turning off the water supply after
use, especially if your house connection does not have a
pressure reducer.
Only connect the mains plug (24) to a properly in-
stalled and freely accessible socket if the water supply
and outlet have been connected correctly (see next
section).
7.3. Filling with water manually
7.2. Water connection
NOTICE!
Damage to the appliance!
If the appliance is connected improperly, there is a risk of
damage to the appliance.
Before adding water, press the
dishwasher.
button to switch on the
The hose must be free of kinks and connected careful-
ly.
If the water pipes are new or have not been used for
a long time, run the water to ensure that the water is
clear and free of impurities. If this precaution is not tak-
en, there is a risk of the water inlet becoming blocked
and the appliance being damaged.
If the appliance is to replace an old appliance, never
use old hose sets for the connection. Connect the ap-
pliance with the new hose sets provided.
Connect the appliance to a drinking water pipe up to
max. 60°C.
Fig. 6 – Filling with water
Only use the accessories supplied or accessories which
are described as suitable in this user manual.
As an alternative to using the water supply via a water tap,
you can also fill up the appliance with water manually (see
Fig. 6).
It is always necessary to fill up the appliance as soon as
the warning light
sound.
lights up. Acoustic signals will
When connecting to the drinking water, ensure that the
appliance is connected to a safety device to stop the
drinking water becoming contaminated by backflow
(in accordance with DIN EN 1717). We recommend hiring
a qualified specialist to perform the installation work,
including the water and electrical connections, and any
repair work.
Fill the measuring container (7) with clean tap water.
Remove the water tank cover (12).
Fill the water tank with water (min./max. 5 litres). Take
care to pour the water into the water tank opening
slowly and carefully to avoid splashing.
Put on the water tank cover.
If the hose supplied does not fit your tap, you can buy
adapters from your plumbing supply store.
108
| General | Details |
|---|---|
| Name | medion DWT20 mini Dishwasher |
| Make | MEDION |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.19 MB |
(1 votes, average: 5.00 out of 5)
Loading...
medion MD 37496 Table Top Dishwasher
Haier QDP555 Series Dishwasher
NEFF S145HTS01G Dishwasher
Miele 12 668 900 – 00 Dishwasher
Hisense HS693C60XAD Dishwasher
BOSCH SMS4HCW19E Dishwasher
FISHER AND PAYKEL DD24DI9 Dishwasher
Whirlpool FB4Y7S Dishwasher
FISHER and PAYKEL DD60STI9 Tail Dishwasher
Miele 12 698 330 Clean Touch Steel Dishwasher
FISHER AND PAYKEL DW60UC4X2 Contemporary Built Under Dishwasher