medion DWT20 mini Dishwasher
Press the program selection button P (22) several times
9. Using the dishwasher
to select the desired program P1, P2 or P3 or press the
button
button
the button
(16) for the glass cleaning program, the
(17) for the baby bottle cleaning program or
(18) for the short program (see “9.6. Se-
CAUTION!
Risk of injury!
There is a risk of injury due to improper use of the appli-
ance.
lecting a wash program”on page 115). With the short
program, you can choose between hot (press 1x
and cold rinsing (press 2x ).
You have the option of adding an extra rinse and/or an
)
Close the appliance door again after a wash cycle has
finished, as an open door could pose a trip hazard.
Do not place any heavy objects on the door if it is
open. The appliance could tip forwards.
extra dry cycle to the programs. Press the
but-
/
ton (21) (see also “9.2. Extra rinse/extra dry”).
The control light for the selected program lights up.
Press the button (15) to start the program.
CAUTION!
While a program is running, the display panel shows the
current status:
Risk of burning!
There is a risk of scalding if hot surfaces are touched.
Hot water/hot steam can escape and cause burns if the
door is opened while a program is running.
Allow the appliance to cool down before emptying. Do
not touch the heating element in the dishwasher dur-
ing or immediately after use.
•
•
•
•
Segment display shows “-:--”– the appliance is in
standby mode
Segment display shows “H:MM”– the program is inter-
rupted
Segment display shows “H:MM”and flashes – the pro-
gram is running
Only operate the dishwasher once the door has been
closed firmly.
Segment display shows “END”– program completed
Do not open the dishwasher door fully straight away
– instead wait for about 3 seconds until the spray arm
stops rotating and then open the door.
If you press the
button while the program is running,
the program is interrupted. The appliance sounds an
acoustic signal every minute.
P
Press the
button again to continue the program.
The program continues after approx. 10 seconds.
Fig. 22 – Using the dishwasher drain
9.1. Switching on the appliance
To start the appliance, proceed as follows:
Add the detergent, rinse aid and, if necessary, salt de-
pending on the desired program.
Insert the dish rack and cutlery basket (6) (see section
“8.6. Loading the dishes and cutlery”on page 112) and
push the dish rack into the dishwasher.
Plug the mains plug (24) into the socket. Turn on the
water supply fully or fill the water tank manually.
Press the
button (23) to switch on the appliance.
Program P1 flashes and is displayed alternately with the
program duration.
114
| General | Details |
|---|---|
| Name | medion DWT20 mini Dishwasher |
| Make | MEDION |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.19 MB |
(1 votes, average: 5.00 out of 5)
Loading...
medion MD 37496 Table Top Dishwasher
FISHER PAYKEL DD24STX6PX1 DishDrawerT Dishwasher
Porter Charles DWTPC5FC Dishwasher
Haier HDW15F3S1 Dishwasher
Monsher MD 4502 Dishwasher
FRIGIDAIRE DWU-22J Dishwasher
IKEA 804.621.67 Lagan Dishwasher
hermitlux HMX-DW04 Table Top Dishwasher
IKEA HYGIENISK Dishwasher
AEG FSB53927Z Integrated Dishwasher
BOSCH SMV6HCX2FR Dishwasher