Miele G5210 Active Plus Dishwasher

1

2

3

4

5

6

7

8

Quick Start Guide  

for dishwashers  

en-AU, NZ  

These short instructions are not a substitute for the  

operating instructions supplied with the machine.  

It is essential to familiarise yourself with the dishwasher  

before using it for the first time. Take note of the Warning  

and Safety instructions, as well as the full descriptions  

on how to use your appliance.  

M.-Nr. 11 697 400 / 02  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Miele G5210 Active Plus Dishwasher
Make	Miele
Language	English
Filetype	PDF (Download)
File size	0.42 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Miele

Miele G5210 Active Plus Dishwasher Overview

Summary of Contents

• Page 1: Quick start guide for dishwashers These short instructions are not a substitute for the operating instructions supplied with the machine. It is essential to familiarise yourself with the dishwasher before using it for the first time. Take note of the warning and safety instructions, as well as the full descriptions on how to use your appliance.
• Page 2: Guide to the appliance Control panel Programme selection Start button with indicator light for starting the selected programme. ECO = ECO Express button for reducing the programme duration. Timer button for selecting a later programme start. Time display Programme selection button for programme selection. Check/Refill indicators for Inlet/Drain, Rinse aid, and Salt. On/Off button for switching the dishwasher on and off.
• Page 3: Risk of corrosion due to saline solution. The salt reservoir should therefore only be opened to replenish the salt. Fill the salt reservoir with approx. 2 l of water (first use only). Place the funnel provided over the salt reservoir and carefully fill with dishwasher salt until the reservoir is full. Clean any excess salt from around the reservoir opening and then screw the salt reservoir cap on again firmly. Immediately after filling the salt container, run the QuickPowerWash 65 °C programme with the Express option and without any load in the dishwasher to dissolve and remove any traces of salt from the cabinet. Lift the yellow button on the lid of the rinse aid container. Only fill with rinse aid until the fill level indicator turns dark when the door is open horizontally. Dishwasher detergent will damage the water softener. Do not fill the salt reservoir with powder or liquid detergent.
• Page 4: Loading the dishwasher involves setting the required time for the programme to start automatically. Adding detergent should follow the dosage recommended by the manufacturer on the packaging. To start a programme, press the Start button and lift the yellow catch on the lid of the detergent compartment. At the end of the programme, the lid will be open, and the time display will show that the programme has finished. Fill the detergent compartment with detergent and ensure the lid is pushed shut until it clicks into place. The dishwasher can be switched off at any time using the designated button. Steam from the dishwasher could damage delicate worktops when opening the door at the end of the programme. Selecting a programme is done using the programme selection button. If required, select the Express programme option, which will remain active until the setting is changed. Allow dishes to cool before unloading them to prevent breaking or chipping.
• Page 5: Cleaning and care Cleaning the spray arms Particles of food can get stuck in the spray arm jets and bearings. The spray arms should therefore be inspected regularly (approx. every 2–4 months). Do not run a wash programme without the lower spray arm or without the filters fitted. Switch the dishwasher off. Take out the cutlery tray (if your dishwasher is fitted with one). Rotate the screw thread of the lower spray arm anti-clockwise and pull the spray arm upwards to remove. Use a pointed object to push food particles stuck in the jets into the spray arm. Rinse the spray arm thoroughly under running water. Refit the upper and middle spray arms. Make sure the spray arms can rotate freely.
• Page 6: Checking the filters in the wash cabinet Do not run a wash programme without the filters or without the lower spray arm fitted. Monitor the condition of the filter combination regularly and clean it if necessary. Cleaning the filters Switch the dishwasher off. Remove the lower spray arm. In order to clean the inside of the filter, pull the microfilter downwards and away from the filter combination. Before removing the filter combination, remove any coarse soiling to prevent it from entering the circulation system. Rinse all the parts under running water. Refit the filter combination so that it lies flat in the base of the wash cabinet. Rotate the screw thread clockwise until the arrow in the viewing window points to the lock symbol.
• Page 7: Programme chart Temperature-sensitive dishes, glasses and plastics Lightly dried-on food deposits Programme with glass care All fresh to dried-on food deposits Variable, sensor-controlled programme Short programme taking less than an hour Water and energy saving programme Stubborn dried-on, burnt-on food deposits containing starch or protein Maximum cleaning performance
• Page 8: Programme Consumption estimate Energy consumption Water consumption Programme duration Gentle 45 °C Auto 45–65 °C QuickPowerWash 65 °C ECO Intensive 75 °C