Home > Miele > Miele HG07-W Fully Dishwasher

Miele HG07-W Fully Dishwasher

Warning and safety instructions  
Temporary or permanent operation on an autonomous power sup-  
ply system or a power supply system that is not synchronised with  
the mains power supply (e.g. island networks, back-up systems) is  
possible. A prerequisite for operation is that the power supply system  
complies with the specifications of EN 50160 or an equivalent stand-  
ard.  
The function and operation of the protective measures provided in  
the domestic electrical installation and in this Miele product must  
also be maintained in isolated operation or in operation that is not  
synchronised with the mains power supply, or these measures must  
be replaced by equivalent measures in the installation. As described,  
for example, in the current version of BS OHSAS 18001–2 ISO  
45001.  
The dishwasher must only be plugged into the electricity supply via  
a suitable switched socket using a fused 3-pin plug (it must not be  
hard-wired). The electrical socket must be easily accessible after the  
dishwasher is installed so that it can be disconnected from the elec-  
tricity supply at any time.  
There must be no electrical sockets behind the dishwasher be-  
cause the building-in niche may be too small. Danger of overheating  
and fire risk if the dishwasher were to be pushed up against a plug.  
The dishwasher must not be installed underneath a hob. The high  
temperatures radiated by hobs could damage the dishwasher below.  
For the same reason, the appliance must not be installed next to  
open fires or other appliances that give off heat, such as heaters etc.,  
not normally found in a kitchen.  
Ensure that the connection data on the dishwasher’s data plate  
(fuse rating, frequency and voltage) match the mains electricity sup-  
ply. This data must correspond in order to avoid the risk of damage to  
the dishwasher. Compare these before connecting the appliance to  
the mains. If in any doubt, consult a qualified electrician.  
Do not connect the dishwasher to the mains supply until it has  
been fully installed and any adjustment has been made to the door  
springs.  
8
GeneralDetails
NameMiele HG07-W Fully Dishwasher
MakeMiele
LanguageEnglish
FiletypePDF (Download)
File size3.49 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 101 i Dishwasher
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele 11 836 740 Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
Miele PFD 102 i Dishwasher

Miele HG07-W Fully Dishwasher