Miele PFD 104 SCVI XXL Dishwasher
*INSTALLATION*
11678880-01
Installation
- The water pressure (flow pressure at
the connection point) must be
between 50 and 1000 kPa (0.5 and
10 bar).
If the water pressure is lower than
this, the fault message Water intake
will appear in the display (see
"Problem solving guide").
If the water pressure is too high, a
pressure reducing valve must be
fitted.
The Miele Waterproof system
As long as your dishwasher has been
installed correctly, the Miele Waterproof
anti-leak system will protect you from
water damage throughout its lifetime.
Water intake
Water in the dishwasher must
not be used as drinking water.
- A tap with a 3/4 inch male thread must
be provided on site. It should be
easily accessible so that the water
supply can be turned off when the
dishwasher is not in use.
- The machine must be connected to
the water supply in strict accordance
with current local and national
requirements ( e.g. Plumbing Code of
Australia (PCA)).
- The water used must at least comply
with national regulations for drinking
water quality.
If the water supply has a high iron
content, there is a danger of
corrosion occurring on items being
cleaned in the dishwasher, as well as
the machine itself.
If the chloride content of the water
exceeds 100 mg/l, the risk of
corrosion to items being cleaned in
the dishwasher will be further
increased.
- The DN 10 inlet hose is approx. 1.5 m
long terminating in a 3/4 inch female
thread. Under no circumstances must
the inlet filter or the flow regulator in
the connection be removed.
This appliance must be installed
according to AS/NZS 3500.1 and AS/
NZS 3500.2. This dishwasher has been
supplied separately with a separate
backflow prevention device (dual check
valve).
The dual check valve supplied
- In certain regions (e.g. mountainous
regions), the water composition may
cause precipitates to form, requiring
the use of softened water for the
dishwasher.
separately with this product must be
installed between the tap and the water
inlet hose. Screw the dual check valve
onto the tap. Then screw the water inlet
hose with the water protection system
onto the thread of the dual check valve.
Turn on the the tap gradually to test for
leaks. If there is a leak, the connection
might not be on securely, or it may have
been screwed on at an angle. Unscrew
and reconnect the water correctly
before tightening it.
| General | Details |
|---|---|
| Name | Miele PFD 104 SCVI XXL Dishwasher |
| Make | Miele |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.05 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Miele PFD 103 SCi XXL XXL Dishwasher
Miele PFD 101 i Dishwasher
Miele AK-CC 550A APFD 102 Dishwasher
Miele PFD 102 APFD 102 Dishwasher
Miele 11 836 740 Dishwasher
Miele PFD 401 U Commercial Dishwasher
Miele PLW 8683 Laboratory Dishwasher
Miele PFD 100 SmartBiz Free-Standing Dishwasher
Miele 12 668 930 Dishwasher
Miele PFD 102 i Dishwasher
BOMANN GSP 7409 Household Dishwasher
BOSCH SMI6ZCS49E-39 Dishwasher
FISHER PAYKEL DW60UT4I2 Tall Dishwasher
LG LDPH7972D Dishwasher
BOSCH SBV4HB802E-01 Fully Integrated Dishwasher
FISHER AND PAYKEL DD24DTI9 N Integrated Dishwasher
FISHER AND PAYKEL DW60U4I2 Dishwasher
BOSCH SMV6ZCX16E Dishwasher
FISHER PAYKEL DW60FC1X1 Dishwasher
FISHER AND PAYKEL DD24DI9N Dishwasher