Home > Montpellier > Montpellier MAB1353DC Retro Dishwasher
Montpellier MAB1353DC Retro Dishwasher
Troubleshooting
9 Troubleshooting
Fault
Possible Cause
Troubleshooting
Your Dishwasher is not plugged in
Plug your Dishwasher in
Switch your Dishwasher on
by pressing the On/Off button
Your Dishwasher is not switched on
Fuse blown
Check your indoor fuses
Tum on the water inlet tap
Close the Dishwasher door
The programme does not start
Water inlet tap is closed
Your Dishwasher door is open
Check the water inlet hose and machine
filters and make sure they are not clogged
Water inlet hose and machine filters are clogged
Check the drain hose, then
either clean or untwist it
Water drain hose is clogged or twisted
Water remains inside the machine
Machine stops during washing
The filters are clogged
The programme is not finished yet
Power failure
Clean the filters
Wait until the programme is finished
Check mains power
Water inlet failure
Check water tap
Shaking and hitting noises are
heard during a wash operation
The spray arm is hitting the
dishes in the lower basket
Move or remove items blocking the spray arm
Do not overload baskets
Dishes placed incorrectly, sprayed
water not reaching affected dishes
Place dishes as instructed in the
section on loading your dishwasher
Dishes leaning against each other
Not enough detergent used
Use the correct amount of detergent,
as instructed in the programme table
Partial food wastes
remain on the dishes
Use the information in the programme table
to select the most appropriate programme
Wrong wash programme selected
Spray arms clogged with food waste
Clean the holes in the spray arms with thin objects
Filters or water drain pump
clogged or filter misplaced
Check the drain hose and
filters are correctly fitted
Use the correct amount of detergent,
as instructed in the programme table
Not enough detergent used
Rinse-aid dosage and/or water softener setting
set too low
Increase rinse-aid and/or water softener level
Whitish stains remain on dishes
High water hardness level
Increase water softener level and add salt
Check the salt compartment cap is closed properly
Select a programme with a drying option
Increase rinse-aid dosage setting
Salt compartment cap not closed properly
Drying option is not selected
Dishes do not dry
Rinse-aid dosage set too low
Stainless-steel quality of the dishes is insufficient
Use only dishwasher-proof sets
Adjust the water hardness level using water
hardness table
High level of salt in wash water
Rust stains form on the
dishes
Check that the salt compartment cap is closed
properly
Salt compartment cap not closed properly
Too much salt spilled in the Dishwasher while
filling it with salt
Use funnel while filling salt to the compartment to
avoid spillage
A poor mains grounding
Consult a qualified electrician immediately
Detergent remains in the
detergent compartment
Detergent was added when the detergent
compartment was wet
Make sure detergent compartment is dry before
use
21
| General | Details |
|---|---|
| Name | Montpellier MAB1353DC Retro Dishwasher |
| Make | Montpellier |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.94 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Montpellier MDWBID6053 Dishwasher
MDI450 Montpellier Dishwasher
Montpellier MDWBID4553 Slimline 45cm Dishwasher
SIEMENS SR93EX24LE Dishwasher
BOSCH SMS4HTW03E Dishwasher
BOSCH SMH4ITX12E Dishwasher
BOSCH SMH6ZCX03E Dishwasher
bolero AGUAZERO 8000 Dishwasher
beko 943711 Dishwasher
Hotpoint 6974265 Dishwasher
BOSCH SBH4ECX21E Dishwasher
Smeg ST3-9AG Dishwasher
FISHER AND PAYKEL DD24STX6I1 Dish Drawer Dishwasher