Home > Montpellier > Montpellier MAB1353DC Retro Dishwasher

Montpellier MAB1353DC Retro Dishwasher

Installation  
IMPORTANT: Items will not wash properly if a drain To remove the top panel, remove the screws that hold  
hose longer than 4m is used.  
it on, located at the rear of the machine. Then, push the  
panel 1 cm from the front towards the rear and lift it.  
Adjust the machine feet according to the slope of  
the floor (3).  
Fit your machine by pushing it under the counter taking  
care not to crush or bend the hoses (4).  
WARNING: After removing the top panel of your  
dishwasher, the machine should be placed in a space  
of the dimensions shown in the table below.  
2.5 Electrical Connection  
WARNING: Your machine is set to operate at  
220-240V. If the mains voltage supply to your  
machine is 110V, connect a transformer of  
110/220V and 3000W between the electrical  
connection and the appliance.  
60cm  
A
Product’s Height  
(+2mm)  
820mm  
Connect the product to a grounded outlet  
protected by a fuse complying with the values  
in the “Technical Specifications table.  
A: If there is no felt on the top of the product; you  
should take into account this product’s height.  
The earthed plug of the machine must be  
connected to an earthed outlet supplied by  
suitable voltage and current.  
2
1
In the absence of earthing installation, an  
authorised electrician should carry out an  
earthing installation. In the case of use without  
earthing installed, we will not be responsible for  
any loss of use that may occur.  
The plug on this appliance will incorporate a  
13A fuse.  
4
2.6 Fitting The Machine Undercounter  
If you wish to fit your machine undercounter, there must  
be sufficient space to do so and the wiring-plumbing  
must be suitable to do so (1). If the space under the  
countertop is not suitable for fitting your machine but it  
will fit with the worktop removed, remove the worktop as  
shown in the illustration (2).  
3
WARNING: The countertop, which the machine  
will be placed under, must be stable in order  
to prevent imbalance. The top panel of the  
dishwasher must be removed to fit the machine  
under the countertop.  
7
GeneralDetails
NameMontpellier MAB1353DC Retro Dishwasher
MakeMontpellier
LanguageEnglish
FiletypePDF (Download)
File size0.94 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Montpellier MDWBID6053 Dishwasher
Montpellier MDWBID6053 Dishwasher
MDI450 Montpellier Dishwasher
MDI450 Montpellier Dishwasher
Montpellier MDWBID4553 Slimline 45cm Dishwasher
Montpellier MDWBID4553 Slimline 45cm Dishwasher

Montpellier MAB1353DC Retro Dishwasher