Home > Montpellier > Montpellier MAB1353DC Retro Dishwasher
Montpellier MAB1353DC Retro Dishwasher
The Control Panel / Cleaning & Maintenance
Select a programme which runs at high temperature
and run the Dishwasher empty.
LED’s
Voice Levels
Energy
Save
1/2
3h
6h
X
If this does not clean your Dishwasher sufficiently, use
a cleaning agent designed for use with dishwashers.
S0
S1
S2
S3
To extend the life of your dishwasher, clean the
appliance regularly, preferably each month.
X
X
X
X
X
X
X
Wipe the door seals regularly with a damp cloth to
remove any accumulated residue or foreign objects.
X
X
8.1 Filters
4. When sound level changes, corresponding LED’s
shown in the above table illuminate.
Clean the filters and spray arms at least once a week.
If any food waste remains or foreign objects on the
coarse and fine filters, remove them and clean them
thoroughly with water.
5. To save the selected sound level, turn off
the machine.
“S0” level means all sounds are off. Factory setting
is “S3”.
a) Micro Filter
b) Coarse Filter
c) Metal Filter
Save Power Mode
•
To remove and clean the filter combination,
turn it counter clockwise and remove it by lifting
it upwards (1).
To activate or deactivate save power mode,
follow the below steps:
1. Open the door and press Option and Delay
(3 & 4) buttons simultaneously for 3 seconds.
•
•
•
Pull the coarse filter out of the micro filter (2).
Then pull and remove the metal filter (3).
2. After 3 seconds, the machine will display last setting.
Rinse the filter with lots of water until it is free of
residue. Reassemble the filters. Replace the filter
insert, and rotate it clockwise (4).
3. When Save Power Mode is activated P1, P2, Energy
Save LED’s illuminate. On this mode the machine will
turn off after 15 minutes of no activity in order to
save energy.
1
2
b
a
4. When Save Power Mode is deactivated P1, P2 LED’s
illuminate. If Save Power Mode is deactivated, as long
as the door is open the machine will stay on unless it
is turned off by the user.
5. To save the selected setting, turn off the machine.
3
4
In factory setting, Save Power Mode is active.
8 Cleaning and Maintenance
c
Cleaning your dishwasher is important to maintain
the machine’s service life Make sure that the water
softening setting is done correctly and correct amount
of detergent is used to prevent limescale accumulation.
Refill the salt compartment when the salt sensor light
comes on. Oil and limescale may build up in your
Dishwasher over time. If this occurs:
•
•
Never use your dishwasher without a filter.
Incorrect fitting of the filter will reduce the
washing effectiveness.
Fill the detergent compartment but do not load any dishes.
•
Clean filters are necessary for proper running
of the machine.
19
| General | Details |
|---|---|
| Name | Montpellier MAB1353DC Retro Dishwasher |
| Make | Montpellier |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.94 MB |

Montpellier MDWBID6053 Dishwasher

MDI450 Montpellier Dishwasher

Montpellier MDWBID4553 Slimline 45cm Dishwasher






































