Home > Montpellier > Montpellier MAB1353DC Retro Dishwasher
Montpellier MAB1353DC Retro Dishwasher
Before Using Your Appliance
3.2 Technical Specifications
Only add water to the salt compartment before
first use.
Capacity
13 place settings
Use softener salt specifically produced for use in
dishwashers.
Dimensions (mm)
Height
Width
850
598
598
When you start your dishwasher, the salt compartment
is filled with water, therefore put the softener salt in
prior to starting your machine (see below for filling
instructions).
Depth
Operating voltage/frequency
Total current
220-240V 50Hz
10A
If the softener salt has overflowed and you do not
start the machine immediately, run a short washing
programme to protect your machine against corrosion.
Total power
1900W
Maximum 1Mpa
Minimum 0.03Mpa
Water supply pressure
4.3 Fill The Salt
To add softener salt,
4 Before Using the Appliance
(1) Open the salt compartment cap by turning it
4.1 Preparing Your Dishwasher For First Use
counter clockwise.
•
Make sure the electricity and supply water
specifications match the values indicated in
the installation instructions for the machine.
(2) Remove salt cap.
(3) Before first use, fill the compartment with 1Kg salt.
If available, using a funnel will make filling easier.
•
•
•
Remove all packaging material inside the machine.
(4) Fill the container with water until it is almost
overflowing. Replace the cap making sure it
is secure and tight.
Set the water softener level, after filling with salt.
Set the rinse-aid level, after filling the rinse
aid compartment.
After every 20-30 Cycles, or when the re-fill light
indicates, add salt into your machine until it fills
up the container (approx. 1Kg).
4.2 Salt Usage
For a good washing function, the dishwasher needs
soft, i.e. less calcareous water. Otherwise, White lime
residues will remain on the dishes and the interior
equipment. This will negatively affect your machine’s
washing, drying and shining performance. When water
flows through the softener system, the ions forming
the hardness are removed from the water and the
water reaches the softness required to obtain the
best washing result. Depending on the level of
hardness of the inflowing water, these ions that
harden the water accumulate rapidly inside the
softener system. Therefore, the softener system
has to be refreshed so that it operates with the
same performance during every wash. For this
purpose, dishwasher salt is used. The dishwasher
can only use special dishwasher salt to soften the
water. Do not use any small grained or powdered type
of salts which are easily soluble (for example table salt).
Using any other type of salt can damage your machine
and will invalidate your guarantee.
1
2
3
4
9
| General | Details |
|---|---|
| Name | Montpellier MAB1353DC Retro Dishwasher |
| Make | Montpellier |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.94 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Montpellier MDWBID6053 Dishwasher
MDI450 Montpellier Dishwasher
Montpellier MDWBID4553 Slimline 45cm Dishwasher
BOSCH SMV4HVX00G Dishwasher
DD24DAX9 N Contemporary Dishwasher
BOSCH SMS4HCW19E Dishwasher
Fisher and Paykel DD24DT2NX9 Built-Under Dishwasher
FISHER PAYKEL DD60SLI9 Sanitise Integrated Single DishDrawer Dishwasher
SIEMENS SN61IX12TG Dishwasher
BOSCH SMH8ZCX01E 60 cm Dishwasher
aspes AJI12600E Dishwasher
BLAKESLEE RC-62 Rack Conveyor Type Dishwasher
BOSCH SMI4HBS19E Dishwasher