Home > Montpellier > Montpellier MAB1353DC Retro Dishwasher
Montpellier MAB1353DC Retro Dishwasher
Installation
2 Installation
2.3 Water Inlet Hose
2.1 Machine Positioning
When positioning the machine, place it in an area
where dishes can be easily loaded and unloaded.
Do not put the machine in an area where the ambient
temperature falls below 0°C.
Read all warnings located on the packaging before
removing the packaging and positioning the machine.
Place the machine close to a water tap and drain.
Take into consideration that the connections will
not be altered once the machine is in position.
WARNING: Use the new water inlet hose supplied
with your machine, do not use an old machine’s hose.
Do not hold the machine by its door or panel.
WARNING: Run water through the new hose before
connecting.
Leave an adequate distance around the machine to
allow ease of movement when cleaning.
WARNING: Connect the hose directly to the water
inlet tap. The pressure supplied by the tap should be
a minimum of 0.03 MPa and a maximum of 1 MPa. If
the pressure exceeds 1 MPa, a pressure relief valve
must be fitted between the connection.
Ensure the water inlet and outlet hoses are not
squeezed or trapped and that the machine does
not stand on the electrical cable or any hoses
while positioning.
Adjust the feet so the machine is level and balanced.
WARNING: After the connections are made, turn the
tap on fully and check for water leaks at both the
tap end and the dishwasher end. Always turn off the
water inlet tap after a wash programme has finished.
The machine should be placed on a flat solid surface
otherwise it will be unstable and the door of the
machine will not close properly.
It s not recommended to fit the dishwasher on any
2.4 Drain Hose
kind of carpet or carpet tiles.
2.2 Water Connection
We recommend fitting a filter to your water inlet supply
in order to prevent damage to your machine due to
contamination (sand, rust, etc.) from indoor plumbing.
This will also help prevent yellowing and deposit
formation after washing.
Note: printing on the water inlet hose! If models are
marked with 25°, the water temperature may be max.
25 °C (cold water).
Connect the water drain hose directly to water drain
hole or to the sink outlet spigot. This connection should
be minimum 50 cm and maximum 110 cm from floor
that the dishwasher is placed on.
6
| General | Details |
|---|---|
| Name | Montpellier MAB1353DC Retro Dishwasher |
| Make | Montpellier |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.94 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Montpellier MDWBID6053 Dishwasher
MDI450 Montpellier Dishwasher
Montpellier MDWBID4553 Slimline 45cm Dishwasher
BOSCH SPV68C73UC, SPV68C73UC Dishwasher
SIEMENS SX93E805CE Dishwasher
FISHER AND PAYKEL DD24DHTI9N Dishwasher
BOSCH SMS6HVI01I 14 Place Settings Free-Standing Dishwasher
ZANUSSI ZSFN121W3 Slimline Dishwasher
Oursson DW4001TD Dishwasher
BOSCH SN23HI65MM Dishwasher
FISHER AND PAYKEL DW60FC4X2 Dishwasher
esatto EDW6012W Dishwasher
BOSCH S189YCX02E Dishwasher