×
- 1. Product Identification (Safety Precautions And Instructions → Preparing The Appliance For Use → First Start-up → Troubleshooting)
- 2. Nelson Thanks You For Choosing One Of Its Products. This Manual Is An Integral Part Of The Appliance. Take Good Care Of It And Keep It To Ha…
- 3. Product Identification (Application, General Functions And Intended Use → Name And Address Of Manufacturer Or Distributor → Declaration Of Conformity To Product Standards)
- 4. Description Of The Appliance (Symbols Used In The Manual)
- 5. Safety Precautions And Instructions (Correct Installation)
- 6. Safe Use
- 7. Correct Maintenance
- 8. Product Characteristics (Overall Dimensions → Lower Back Panel → Filler Hose → Electricity Supply Cable)
- 9. Technical Characteristics (Electricity Supply → Intake Water Pressure → Intake Water Temperature → Noise Level)
- 10. Preparing The Appliance For Use (Positioning And Installation)
- 11. Connection To The Water Supply (Drain Connection)
- 12. Connection To The Electricity Supply (Electrical Safety)
- 13. First Start-up (Preparing For Use → Using The Water Softener)
- 14. Control Panel (On-off Button → Program Selection Button → Start Confirm/pause Button → Total Emptying Button (tank And Boiler))
- 15. Set-up (Dishwasher Parameter Modification Procedure → Quitting The Setup Menu Automatically → Quitting The Setup Menu In Manual Mode)
- 16. Modifiable Parameters (Rinsing Temperature → Washing Temperature → Adjusting Rinse Aid Dispensing → Adjusting Detergent Dispensing)
- 17. Regeneration Frequency Setup (models With Softener) (Mains Water Hardness Setting Table → Extra Rinse → 'clean Water' Cycle)
- 18. Thermostop (High Speed (fst) Or Economy (eco) Filling (fill) → Cycles Performed Counter → User Program Duration Customisation (optional, Only If Installed))
- 19. Service Setting (for After-sales Service Only) (Entry Into The Technical Set-up Menu → Starting The Peristaltic Pumps Rapid Filling Of Detergent And Rinse Aid Delivery Circuit)
- 20. Malfunctions Shown On The Display (for The Technician) (Tank Temperature Probe Malfunction → Tank Water Filling Malfunction → Water Pump-out Malfunction → Boiler Temperature Probe Malfunction)
- 21. Leakage Or Unbinding Of The Tube (water Runs Inside The Tube) (Menu Service Wrong Setting 'rp' → Check Cleanliness Of The Rinse Nozzles → Faulty Boiler Pressure Switch (it Always Detects 'full') → Rinsing Pump Malfunction (if Present))
- 22. Instructions For The User (Control Panel → On-off Button → Program Selection Button → Start Confirm/pause Button)
- 23. Before Washing (Check)
- 24. First Use Each Day (tank And Boiler Empty) (Load The Dishes → Select The Program Required By Pressing → Confirm The Program Start By Pressing And Holding It Down For 1 Second)
- 25. Operating Anomalies (Power Blackout)
- 26. Program (Filter Presence Sensor (on Some Models Only))
- 27. Choosing The Program (Program → Power Blackouts)
- 28. Baskets Provided (Glasses → Cutlery)
- 29. Maintenance And Cleaning
- 30. Cleaning The Filters (Cleaning The Outside Of The Appliance → Cleaning The Filter During The Day → Total Pump-out At The End Of The Day)
- 31. Resin Regeneration (for Models With Softener) (Frequency Of Resin Regeneration Cycle → Indications For Regeneration Cycle → Methods For Starting Regeneration → Completion Of Regeneration Cycle)
- 32. Topping Up With Regenerating Salt (for Models With Softener) (Routine Inspection Of The Spray Arm (once A Week) → Lengthy Periods Out Of Use)
- 33. Troubleshooting (The Dishwasher Does Not Start → The Washing Program Does Not Start → Poor Washing Results)
- 34. Verify The Filter Of The Tube (Insufficient Rinse → Insufficient Drying → Stained Glasses And Cutlery → Water Left In The Tank After Pump-out)
- 35. Malfunctions Shown On The Display (for The User) (Tank Temperature Probe Anomaly → Water Pump-out Anomaly → Boiler Heating Anomaly → Boiler Emptying Anomaly)
×
nelson AD40 Commercial Dishwasher
11 BASKETS PROVIDED
The shape and material of the baskets provided with the dishwasher depend on the purchased model.
Extra baskets can be purchased through the After-Sale Service. The following images are indicative.
NOTE:
It is recommended to use baskets that are intact and not damaged by wear or
tampering. The plastic runners of the baskets, if present, must not be removed,
damaged, modified or tampered with.
Glasses: Place the glasses downwards.
Cutlery
Use the dedicated basket.
Place the cutlery
randomly, preferably with
the handle downwards,
using caution to avoid
injures due to prongs of
forks and blades of knives.
28
| General | Details |
|---|---|
| Name | nelson AD40 Commercial Dishwasher |
| Make | NELSON |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.54 MB |

NELSON AD60 Passthrough Dishwasher


FISHER PAYKEL DD60SDFTB9 Sanitise Single DishDrawer Dishwasher

BOSCH SMH8ZCX01E 60 cm Dishwasher

Fisher Paykel DW60CSX1 FP AA Dishwasher

Indesit IN2IE10CS80 Dishwasher

ZLINE 65286410 Monument Dishwasher

BOSCH SHXM63W Dishwasher

GE APPLIANCES GDT670SGV Interior Dishwasher with Hidden Controls

HOMCOM 800-190V70 Tabletop Dishwasher

BOSCH 9000560760 Undercounter Dishwasher

Whirlpool 3C26 Dishwasher
Table of Contents
- 1. Product Identification - Safety Precautions And Instructions →
- 2. Nelson Thanks You For Choosing One Of Its Products. This Man... →
- 3. Product Identification - Application, General Functions And ... →
- 4. Description Of The Appliance - Symbols Used In The Manual →
- 5. Safety Precautions And Instructions - Correct Installation →
- 6. Safe Use →
- 7. Correct Maintenance →
- 8. Product Characteristics - Overall Dimensions →
- 9. Technical Characteristics - Electricity Supply →
- 10. Preparing The Appliance For Use - Positioning And Installati... →
- 11. Connection To The Water Supply - Drain Connection →
- 12. Connection To The Electricity Supply - Electrical Safety →
- 13. First Start-up - Preparing For Use →
- 14. Control Panel - On-off Button →
- 15. Set-up - Dishwasher Parameter Modification Procedure →
- 16. Modifiable Parameters - Rinsing Temperature →
- 17. Regeneration Frequency Setup (models With Softener) - Mains ... →
- 18. Thermostop - High Speed (fst) Or Economy (eco) Filling (fill... →
- 19. Service Setting (for After-sales Service Only) - Entry Into ... →
- 20. Malfunctions Shown On The Display (for The Technician) - Tan... →
- 21. Leakage Or Unbinding Of The Tube (water Runs Inside The Tube... →
- 22. Instructions For The User - Control Panel →
- 23. Before Washing - Check →
- 24. First Use Each Day (tank And Boiler Empty) - Load The Dishes →
- 25. Operating Anomalies - Power Blackout →
- 26. Program - Filter Presence Sensor (on Some Models Only) →
- 27. Choosing The Program - Program →
- 28. Baskets Provided - Glasses →
- 29. Maintenance And Cleaning →
- 30. Cleaning The Filters - Cleaning The Outside Of The Appliance →
- 31. Resin Regeneration (for Models With Softener) - Frequency Of... →
- 32. Topping Up With Regenerating Salt (for Models With Softener)... →
- 33. Troubleshooting - The Dishwasher Does Not Start →
- 34. Verify The Filter Of The Tube - Insufficient Rinse →
- 35. Malfunctions Shown On The Display (for The User) - Tank Temp... →





































