×
- 1. Product Identification (Safety Precautions And Instructions → Preparing The Appliance For Use → First Start-up → Troubleshooting)
- 2. Nelson Thanks You For Choosing One Of Its Products. This Manual Is An Integral Part Of The Appliance. Take Good Care Of It And Keep It To Ha…
- 3. Product Identification (Application, General Functions And Intended Use → Name And Address Of Manufacturer Or Distributor → Declaration Of Conformity To Product Standards)
- 4. Description Of The Appliance (Symbols Used In The Manual)
- 5. Safety Precautions And Instructions (Correct Installation)
- 6. Safe Use
- 7. Correct Maintenance
- 8. Product Characteristics (Overall Dimensions → Lower Back Panel → Filler Hose → Electricity Supply Cable)
- 9. Technical Characteristics (Electricity Supply → Intake Water Pressure → Intake Water Temperature → Noise Level)
- 10. Preparing The Appliance For Use (Positioning And Installation)
- 11. Connection To The Water Supply (Drain Connection)
- 12. Connection To The Electricity Supply (Electrical Safety)
- 13. First Start-up (Preparing For Use → Using The Water Softener)
- 14. Control Panel (On-off Button → Program Selection Button → Start Confirm/pause Button → Total Emptying Button (tank And Boiler))
- 15. Set-up (Dishwasher Parameter Modification Procedure → Quitting The Setup Menu Automatically → Quitting The Setup Menu In Manual Mode)
- 16. Modifiable Parameters (Rinsing Temperature → Washing Temperature → Adjusting Rinse Aid Dispensing → Adjusting Detergent Dispensing)
- 17. Regeneration Frequency Setup (models With Softener) (Mains Water Hardness Setting Table → Extra Rinse → 'clean Water' Cycle)
- 18. Thermostop (High Speed (fst) Or Economy (eco) Filling (fill) → Cycles Performed Counter → User Program Duration Customisation (optional, Only If Installed))
- 19. Service Setting (for After-sales Service Only) (Entry Into The Technical Set-up Menu → Starting The Peristaltic Pumps Rapid Filling Of Detergent And Rinse Aid Delivery Circuit)
- 20. Malfunctions Shown On The Display (for The Technician) (Tank Temperature Probe Malfunction → Tank Water Filling Malfunction → Water Pump-out Malfunction → Boiler Temperature Probe Malfunction)
- 21. Leakage Or Unbinding Of The Tube (water Runs Inside The Tube) (Menu Service Wrong Setting 'rp' → Check Cleanliness Of The Rinse Nozzles → Faulty Boiler Pressure Switch (it Always Detects 'full') → Rinsing Pump Malfunction (if Present))
- 22. Instructions For The User (Control Panel → On-off Button → Program Selection Button → Start Confirm/pause Button)
- 23. Before Washing (Check)
- 24. First Use Each Day (tank And Boiler Empty) (Load The Dishes → Select The Program Required By Pressing → Confirm The Program Start By Pressing And Holding It Down For 1 Second)
- 25. Operating Anomalies (Power Blackout)
- 26. Program (Filter Presence Sensor (on Some Models Only))
- 27. Choosing The Program (Program → Power Blackouts)
- 28. Baskets Provided (Glasses → Cutlery)
- 29. Maintenance And Cleaning
- 30. Cleaning The Filters (Cleaning The Outside Of The Appliance → Cleaning The Filter During The Day → Total Pump-out At The End Of The Day)
- 31. Resin Regeneration (for Models With Softener) (Frequency Of Resin Regeneration Cycle → Indications For Regeneration Cycle → Methods For Starting Regeneration → Completion Of Regeneration Cycle)
- 32. Topping Up With Regenerating Salt (for Models With Softener) (Routine Inspection Of The Spray Arm (once A Week) → Lengthy Periods Out Of Use)
- 33. Troubleshooting (The Dishwasher Does Not Start → The Washing Program Does Not Start → Poor Washing Results)
- 34. Verify The Filter Of The Tube (Insufficient Rinse → Insufficient Drying → Stained Glasses And Cutlery → Water Left In The Tank After Pump-out)
- 35. Malfunctions Shown On The Display (for The User) (Tank Temperature Probe Anomaly → Water Pump-out Anomaly → Boiler Heating Anomaly → Boiler Emptying Anomaly)
×
nelson AD40 Commercial Dishwasher
| General | Details |
|---|---|
| Name | nelson AD40 Commercial Dishwasher |
| Make | NELSON |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.54 MB |




(1 votes, average: 5.00 out of 5)
NELSON AD60 Passthrough Dishwasher


FISHER AND PAYKEL DW60FC4X1 Dishwasher

BOSCH SHX4AEF5N Smart Dishwasher

BOSCH SMI4HAS19E Integrated Dishwasher

FISHER PAYKEL DD24DCTX9 N Dishwasher

BOSCH SMV2HVX02E-01 Dishwasher

SHARP QW-NA24S42DI-EE Dishwasher

Hotpoint H0I D534A S Fully Dishwasher

HEINNER HWDM-V9614D Front Load Dishwasher

CMA DISHMACHINES EST-AH Door Type Rack Low Dishwasher

Hotpoint HSFO 3T223 Dishwasher
Table of Contents
- 1. Product Identification - Safety Precautions And Instructions →
- 2. Nelson Thanks You For Choosing One Of Its Products. This Man... →
- 3. Product Identification - Application, General Functions And ... →
- 4. Description Of The Appliance - Symbols Used In The Manual →
- 5. Safety Precautions And Instructions - Correct Installation →
- 6. Safe Use →
- 7. Correct Maintenance →
- 8. Product Characteristics - Overall Dimensions →
- 9. Technical Characteristics - Electricity Supply →
- 10. Preparing The Appliance For Use - Positioning And Installati... →
- 11. Connection To The Water Supply - Drain Connection →
- 12. Connection To The Electricity Supply - Electrical Safety →
- 13. First Start-up - Preparing For Use →
- 14. Control Panel - On-off Button →
- 15. Set-up - Dishwasher Parameter Modification Procedure →
- 16. Modifiable Parameters - Rinsing Temperature →
- 17. Regeneration Frequency Setup (models With Softener) - Mains ... →
- 18. Thermostop - High Speed (fst) Or Economy (eco) Filling (fill... →
- 19. Service Setting (for After-sales Service Only) - Entry Into ... →
- 20. Malfunctions Shown On The Display (for The Technician) - Tan... →
- 21. Leakage Or Unbinding Of The Tube (water Runs Inside The Tube... →
- 22. Instructions For The User - Control Panel →
- 23. Before Washing - Check →
- 24. First Use Each Day (tank And Boiler Empty) - Load The Dishes →
- 25. Operating Anomalies - Power Blackout →
- 26. Program - Filter Presence Sensor (on Some Models Only) →
- 27. Choosing The Program - Program →
- 28. Baskets Provided - Glasses →
- 29. Maintenance And Cleaning →
- 30. Cleaning The Filters - Cleaning The Outside Of The Appliance →
- 31. Resin Regeneration (for Models With Softener) - Frequency Of... →
- 32. Topping Up With Regenerating Salt (for Models With Softener)... →
- 33. Troubleshooting - The Dishwasher Does Not Start →
- 34. Verify The Filter Of The Tube - Insufficient Rinse →
- 35. Malfunctions Shown On The Display (for The User) - Tank Temp... →





































