×
- 1. Product Identification (Safety Precautions And Instructions → Preparing The Appliance For Use → First Start-up → Troubleshooting)
- 2. Nelson Thanks You For Choosing One Of Its Products. This Manual Is An Integral Part Of The Appliance. Take Good Care Of It And Keep It To Ha…
- 3. Product Identification (Application, General Functions And Intended Use → Name And Address Of Manufacturer Or Distributor → Declaration Of Conformity To Product Standards)
- 4. Description Of The Appliance (Symbols Used In The Manual)
- 5. Safety Precautions And Instructions (Correct Installation)
- 6. Safe Use
- 7. Correct Maintenance
- 8. Product Characteristics (Overall Dimensions → Lower Back Panel → Filler Hose → Electricity Supply Cable)
- 9. Technical Characteristics (Electricity Supply → Intake Water Pressure → Intake Water Temperature → Noise Level)
- 10. Preparing The Appliance For Use (Positioning And Installation)
- 11. Connection To The Water Supply (Drain Connection)
- 12. Connection To The Electricity Supply (Electrical Safety)
- 13. First Start-up (Preparing For Use → Using The Water Softener)
- 14. Control Panel (On-off Button → Program Selection Button → Start Confirm/pause Button → Total Emptying Button (tank And Boiler))
- 15. Set-up (Dishwasher Parameter Modification Procedure → Quitting The Setup Menu Automatically → Quitting The Setup Menu In Manual Mode)
- 16. Modifiable Parameters (Rinsing Temperature → Washing Temperature → Adjusting Rinse Aid Dispensing → Adjusting Detergent Dispensing)
- 17. Regeneration Frequency Setup (models With Softener) (Mains Water Hardness Setting Table → Extra Rinse → 'clean Water' Cycle)
- 18. Thermostop (High Speed (fst) Or Economy (eco) Filling (fill) → Cycles Performed Counter → User Program Duration Customisation (optional, Only If Installed))
- 19. Service Setting (for After-sales Service Only) (Entry Into The Technical Set-up Menu → Starting The Peristaltic Pumps Rapid Filling Of Detergent And Rinse Aid Delivery Circuit)
- 20. Malfunctions Shown On The Display (for The Technician) (Tank Temperature Probe Malfunction → Tank Water Filling Malfunction → Water Pump-out Malfunction → Boiler Temperature Probe Malfunction)
- 21. Leakage Or Unbinding Of The Tube (water Runs Inside The Tube) (Menu Service Wrong Setting 'rp' → Check Cleanliness Of The Rinse Nozzles → Faulty Boiler Pressure Switch (it Always Detects 'full') → Rinsing Pump Malfunction (if Present))
- 22. Instructions For The User (Control Panel → On-off Button → Program Selection Button → Start Confirm/pause Button)
- 23. Before Washing (Check)
- 24. First Use Each Day (tank And Boiler Empty) (Load The Dishes → Select The Program Required By Pressing → Confirm The Program Start By Pressing And Holding It Down For 1 Second)
- 25. Operating Anomalies (Power Blackout)
- 26. Program (Filter Presence Sensor (on Some Models Only))
- 27. Choosing The Program (Program → Power Blackouts)
- 28. Baskets Provided (Glasses → Cutlery)
- 29. Maintenance And Cleaning
- 30. Cleaning The Filters (Cleaning The Outside Of The Appliance → Cleaning The Filter During The Day → Total Pump-out At The End Of The Day)
- 31. Resin Regeneration (for Models With Softener) (Frequency Of Resin Regeneration Cycle → Indications For Regeneration Cycle → Methods For Starting Regeneration → Completion Of Regeneration Cycle)
- 32. Topping Up With Regenerating Salt (for Models With Softener) (Routine Inspection Of The Spray Arm (once A Week) → Lengthy Periods Out Of Use)
- 33. Troubleshooting (The Dishwasher Does Not Start → The Washing Program Does Not Start → Poor Washing Results)
- 34. Verify The Filter Of The Tube (Insufficient Rinse → Insufficient Drying → Stained Glasses And Cutlery → Water Left In The Tank After Pump-out)
- 35. Malfunctions Shown On The Display (for The User) (Tank Temperature Probe Anomaly → Water Pump-out Anomaly → Boiler Heating Anomaly → Boiler Emptying Anomaly)
×
nelson AD40 Commercial Dishwasher
NELSON thanks you for choosing one of its products.
This manual is an integral part of the appliance. Take good care of it and keep it to hand throughout the
appliance’s life cycle, since it contains important information about assembly, safety, use and maintenance.
In the event that the appliance is sold on, consign this manual to the new owner.
Before putting the appliance into operation, read all the instructions in this manual carefully to become
familiar with the right conditions for the proper use of your professional dishwasher.
2
| General | Details |
|---|---|
| Name | nelson AD40 Commercial Dishwasher |
| Make | NELSON |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.54 MB |

NELSON AD60 Passthrough Dishwasher


NEFF S187TC800E Dishwasher

FISHER PAYKEL DD60SDFTB9 Dishwasher

Hisense HV693C60UK Dishwasher

BOSCH SBV6ECX00E/38 Fully Integrated Dishwasher

Mueller DW-1800 18 in. Black Front Digital Dishwasher

BOSCH SMV4HB802E Dishwasher

AEG FSB64907Z Dishwasher

BOSCH SMS46NI10M Dishwasher

FISHER PAYKEL DD24DDFT9 Series Dishwasher

Electrolux GA55GLICN Dishwasher
Table of Contents
- 1. Product Identification - Safety Precautions And Instructions →
- 2. Nelson Thanks You For Choosing One Of Its Products. This Man... →
- 3. Product Identification - Application, General Functions And ... →
- 4. Description Of The Appliance - Symbols Used In The Manual →
- 5. Safety Precautions And Instructions - Correct Installation →
- 6. Safe Use →
- 7. Correct Maintenance →
- 8. Product Characteristics - Overall Dimensions →
- 9. Technical Characteristics - Electricity Supply →
- 10. Preparing The Appliance For Use - Positioning And Installati... →
- 11. Connection To The Water Supply - Drain Connection →
- 12. Connection To The Electricity Supply - Electrical Safety →
- 13. First Start-up - Preparing For Use →
- 14. Control Panel - On-off Button →
- 15. Set-up - Dishwasher Parameter Modification Procedure →
- 16. Modifiable Parameters - Rinsing Temperature →
- 17. Regeneration Frequency Setup (models With Softener) - Mains ... →
- 18. Thermostop - High Speed (fst) Or Economy (eco) Filling (fill... →
- 19. Service Setting (for After-sales Service Only) - Entry Into ... →
- 20. Malfunctions Shown On The Display (for The Technician) - Tan... →
- 21. Leakage Or Unbinding Of The Tube (water Runs Inside The Tube... →
- 22. Instructions For The User - Control Panel →
- 23. Before Washing - Check →
- 24. First Use Each Day (tank And Boiler Empty) - Load The Dishes →
- 25. Operating Anomalies - Power Blackout →
- 26. Program - Filter Presence Sensor (on Some Models Only) →
- 27. Choosing The Program - Program →
- 28. Baskets Provided - Glasses →
- 29. Maintenance And Cleaning →
- 30. Cleaning The Filters - Cleaning The Outside Of The Appliance →
- 31. Resin Regeneration (for Models With Softener) - Frequency Of... →
- 32. Topping Up With Regenerating Salt (for Models With Softener)... →
- 33. Troubleshooting - The Dishwasher Does Not Start →
- 34. Verify The Filter Of The Tube - Insufficient Rinse →
- 35. Malfunctions Shown On The Display (for The User) - Tank Temp... →





































