Robinhood DWG12P6FWH Dishwasher
Installation Instructions
Positioning the Appliance
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides,
along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can
be positioned either to the right or the left sides to facilitate proper installation.
Levelling the Appliance
Once the appliance is positioned for levelling, the height of the dishwasher may be altered via adjustment of
the screwing level of the feet.
Electrical Connection
WARNING!
For personal safety:
•
•
Do not use an extension cord or an adapter plug with this appliance.
Do not, under any circumstances, cut or remove the earthing connection from the power cord.
Please look at the rating label to know the rating voltage and connect the dishwasher to the appropriate power
supply. Use the required fuse 10-amp, time delay fuse or circuit breaker recommended and provide separate
circuit serving only this appliance.
Ensure proper ground exists before use!
Ensure the voltage and frequency of the power being corresponds to those on the rating plate. Only insert the
plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be
connected is not appropriate for the plug , replace the socket, rather than using an adaptor or the like as
they could cause overheating and burns.
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the risk of
electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a
cord having an equipment-earthing conductor and an earthing plug. The plug must be plugged into an
appropriate outlet that is installed and earthed in accordance with all local standards and requirements.
NOTE: After having installed the appliance, the switched outlet must always be in an accessible position.
WARNING!
•
•
Improper connection of the equipment earthing conductor can result in the risk of an electric shock.
Check with a qualified electrician or service representative if you are in doubt whether the appliance is
properly earthed.
•
Do not modify the plug provided with the appliance. If the plug does not fit properly to the outlet,
please have a qualified electrician to install a proper outlet.
Cold Water Connection
Connect the cold-water supply hose to a threaded 3/4(inch) connector and make
sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time,
let the water run to make sure that the water is clear. This precaution is needed to
avoid the risk of the water inlet to be blocked and damage the appliance.
WARNING! Please close the hydrant after using.
2
| General | Details |
|---|---|
| Name | Robinhood DWG12P6FWH Dishwasher |
| Make | Robinhood |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.79 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BOSCH SMS2HTI02E Dishwasher
Hotpoint QEUO18 Dishwasher
BOSCH SMV4HBX40E-39 Dishwasher
FISHER PAYKEL DD60SCX9 Single Dish Drawer Dishwasher
smeg LVS262DSX Free Standing Dishwasher
BOSCH SBH4HVX00G Dishwasher
PHILCO PD 1045 EA Dishwasher
edesa EHDB-6930-I Dishwasher
ELEKTRO MARKABOLT S175ECX13E Dishwasher
BOSCH SCX6ITB00E Dishwasher