Robinhood DWG12P6FWH Dishwasher
Operating Instructions
Starting a cycle wash
1- Draw out the lower and upper basket, load the dishes and push them back. It is recommended to load
the lower basket first, then the upper one (see the section entitled “Loading the Dishwasher basket”).
2- Pour in the detergent (see the section entitled“ Detergent and Rinse Aid”).
3- Insert the plug into the socket. The power supply is 220-240 VAC /50 HZ, the specification of the
socket is 10A 250VAC. Make sure that the water supply is turned on to full pressure.
4- Close the door, press the On/Off button to switch on the machine.
5- Press the program button , the wash program will be changed as following direction:
Normal->90mins->Rapid->Glass->Intensive->Heavy->Normal
If a program is selected, the responding light will be on. Then press the Start/Pause button, the
dishwasher begins to start.
Change the Program
Premise:
•
A cycle that is underway can only be modified if it has only been running for a short time. Otherwise,
the detergent may have already been released, and the appliance may have already drained the
wash water. In this case, the detergent dispenser must be refilled (see the section entitled " Detergent
" ).
•
Press the Start/Pause button, the machine will be in standby state, press the program button more
than 3s then you can change the program to the desired cycle setting (see the section entitled "
Starting a wash " )
NOTE!
If you open the door during a wash cycle , the machine will pause. The program light will stop blinking and the
buzzer will ring every minute unless you close the door . After you close the door, the machine will keep on
working after 10 seconds.
Forgot to Add a Dish
A forgotten dish can be added any time before the detergent cup opens.
1- Press the Start/Pause Button to stop the washing.
2- Open the door a little.
3- After the spray arms stop working, you can open the door completely.
4- Add forgotten dishes.
5- Close the door.
6- Press the Start/Pause Button, the dishwasher will run after 10 seconds.
At the End of the Wash Cycle
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn
off the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid scald the dishes and utensils are still hot and
more susceptible to breakage. They will also dry better.
Switch Off the Dishwasher
The Led screen is on but the colon icon is not blinking, only in this case the Programme has ended.
1. Switch off the dishwasher by pressing the ON/OFF button.
2. Turn off the water tap.
Open the door carefully
Hot dishes are sensitive to knocks. The dishes should be allowed to cool down around 15 minutes
before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes. In this way they
will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and then the upper one. This will avoid water dripping from the upper Basket onto
the dishes in the lower one.
WARNING! It is dangerous to open the door when washing because hot water may scald you.
12
| General | Details |
|---|---|
| Name | Robinhood DWG12P6FWH Dishwasher |
| Make | Robinhood |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.79 MB |
(1 votes, average: 5.00 out of 5)
Loading...
VIKING FDW102WS Dishwasher
BOSCH SHS53CM5N Dishwasher
STIRLING STR-DWSS14 14 Place Setting Dishwasher
Mueller DW-1800 Series 18 Inch Dishwasher
IKEA FROSLUNDA Dishwasher
BOSCH SMS6ZCI10G Dishwasher
HEINNER HDW-BI4505IE++ Dishwasher
Bosch SMU4HTW02H-01 Dishwasher
FISHER PAYKEL DD60DAW9 Dishwasher
FISHER PAYKEL DD60SCX9 Dish Drawer Dishwasher