Robinhood DWG12P6FWH Dishwasher
Cleaning and Maintenance
Protect Against Freezing
Please take frost protection measures on the dishwasher in winter. Every time after washing cycles,
please operate as follows:
1. Cut off the electrical power to the dishwasher.
2. Turn off the water supply and disconnect the water inlet pipe from the water valve.
3. Drain the water from the inlet pipe and water valve. (Use a pan to gather the water)
4. Reconnect the water inlet pipe to the water valve.
5. Remove the filter at the bottom of the tub and use a sponge to soak up water in the sump.
NOTE! If your dishwasher cannot work because of the ice, please contact professional service persons.
Cleaning the Spray Arms
•
It is necessary to clean the spray arms regularly for hard water chemicals will clog the spray arm jets
and bearings.
•
•
•
To remove the upper spray arm, hold the nut, rotate the arm clockwise to remove it.
To remove the lower spray arm, pull out the spray arm upward.
Wash the arms in soapy and warm water and use a soft brush to clean the jets. Replace them after
rinsing them thoroughly.
15
| General | Details |
|---|---|
| Name | Robinhood DWG12P6FWH Dishwasher |
| Make | Robinhood |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.79 MB |





































