Home > scandomestic > Scandomestic DWB1442WC Dishwasher

Scandomestic DWB1442WC Dishwasher

Caring for the dishwasher  
Frost precaution  
Please take frost protection measures on the dishwasher in winter. Every time  
after washing cycles, please operate as follows:  
Cut off the electrical power to the dishwasher at the supply source.  
Turn off the water supply and disconnect the water inlet pipe from the water  
valve.  
Drain the water from the inlet pipe and water valve. (Use a pan to gather the  
water)  
Reconnect the water inlet pipe to the water valve.  
Remove the filter at the bottom of the tub and use a sponge to soak up water  
in the sump.  
After every wash  
After every wash, turn off the water supply to the appliance and leave the door  
slightly open for a while so that moisture and odors are not trapped inside.  
Remove the plug  
Before cleaning or performing maintenance, always remove the plug from the  
socket.  
No solvents or abrasive cleaning  
To clean the exterior and rubber parts of the dishwasher, do not use solvents or  
abrasive cleaning products. Only use a cloth with warm soapy water.  
To remove spots or stains from the surface of the interior, use a cloth dampened  
with water an a little vinegar, or a cleaning product made specifically for  
dishwashers.  
When not in use for a long time  
It is recommend that you run a wash cycle with the dishwasher empty and then  
remove the plug from the socket, turn off the water supply and leave the door of  
the appliance slightly open. This will help the door seals to last longer and prevent  
odors from forming within the appliance.  
Moving the appliance  
If the appliance must be moved, try to keep it in the vertical position. If absolutely  
necessary, it can be positioned on its back.  
Seals  
One of the factors that cause odours to form in the dishwasher is food that  
remains trapped in the seals. Periodic cleaning with a damp sponge will prevent  
this from occurring.  
INSTALLATION INSTRUCTION  
Warning  
Electrical Shock Hazard Disconnect electrical power before  
installing dishwasher.  
Failure to do so could result in death or electrical shock.  
Attention  
The installation of the pipes and electrical equipment should be done by  
professionals.  
About Power Connection  
Warning  
For personal safety:  
Do not use an extension cord or an adapter plug with this appliance.  
Do not, under any circumstances, cut or remove the earthing connection from the  
power cord.  
Electrical requirements  
Please look at the rating label to know the rating voltage and connect the  
dishwasher to the appropriate power supply. Use the required fuse 10A/13A/16A,  
time delay fuse or circuit breaker recommended and provide separate circuit  
serving only this appliance.  
Electrical connection  
Ensure the voltage and frequency of the power being corresponds to those on the  
rating plate. Only insert the plug into an electrical socket which is earthed  
properly. If the electrical socket to which the appliance must be connected is not  
appropriate for the plug, replace the socket, rather than using a adaptors or the  
like as they could cause overheating and burns.  
Ensure that proper earthing exists before use  
GeneralDetails
NameScandomestic DWB1442WC Dishwasher
Makescandomestic
LanguageEnglish
FiletypePDF (Download)
File size2.14 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Scandomestic DWB1442WC Dishwasher