Home > scandomestic > Scandomestic DWB1442WC Dishwasher

Scandomestic DWB1442WC Dishwasher

Please follow the steps below for adding dishwasher salt:  
1
2
Remove the lower basket and unscrew the reservoir cap.  
Place the end of the funnel (if supplied) into the hole and pour in about 1.5 kg  
of dishwasher salt.  
3
Fill the salt container to its maximum limit with water, It is normal for a small  
amount of water to come out of the salt container.  
4
5
After filling the container, screw back the cap tightly.  
The salt warning light will turn off after the salt container has been filled with  
salt.  
6
Immediately after filling the salt into the salt container, a washing program  
should be started (We suggest to use a short program). Otherwise the filter  
system, pump or other important parts of the machine may be damaged by  
salty water. This is out of warranty.  
NOTE:  
The salt container must only be refilled when the salt warning light (  
) in the  
control panel comes on. Depending on how well the salt dissolves, the salt  
warning light may still be on even though the salt container is filled.  
If there is no salt warning light in the control panel (for some models), you can  
estimate when to fill the salt into the softener by the cycles that the dishwasher  
has run.  
If salt has spilled, run a soak or quick program to remove it.  
Basket Loading Tips  
Adjusting the upper basket  
Type 1:  
The height of the upper basket can be easily adjusted to accommodate taller  
dishes in either the upper or lower basket.  
To adjust the height of the upper rack, follow these steps:  
GeneralDetails
NameScandomestic DWB1442WC Dishwasher
Makescandomestic
LanguageEnglish
FiletypePDF (Download)
File size2.14 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Scandomestic DWB1442WC Dishwasher