Home > scandomestic > Scandomestic DWB1442WC Dishwasher

Scandomestic DWB1442WC Dishwasher

Connection of drain hoses  
Insert the drain hose  
into a drainpipe with  
a minimum diameter  
of 4 cm, or let it run  
into the sink, making  
sure to avoid  
bending or crimping  
it. The height of  
drainpipe must be  
less than 1000 mm.  
The free end of the  
hose must not be  
immersed in water to avoid the back flow of it.  
Please securely fix the drain hose in either position A or position B  
How to drain excess water from hoses  
If the connection to the drainpipe is positioned higher than 1000 mm, excess  
water may remain in the drain hose. It will be necessary to drain excess water  
from the hose into a bowl or suitable container that is held outside and lower  
than the sink.  
Water outlet  
Connect the water drain hose. The drain hose must be correctly fitted to avoid  
water leaks. Ensure that the water drain hose is not kinked or squashed.  
Extension hose  
If you need a drain hose extension, make sure to use a similar drain hose.  
It must not be longer than 4 meters, otherwise the cleaning effect of the  
dishwasher could be reduced.  
Syphon connection  
The waste connection must be at a height less than 1000 mm (maximum) from  
the bottom of the dishwasher.  
Positioning the appliance  
Position the appliance in the desired location. The back should rest against the  
wall behind it, and the sides, along the adjacent cabinets or walls. The dishwasher  
is equipped with water supply and drain hoses that can be positioned either to  
the right or the left sides to facilitate proper installation.  
GeneralDetails
NameScandomestic DWB1442WC Dishwasher
Makescandomestic
LanguageEnglish
FiletypePDF (Download)
File size2.14 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Scandomestic DWB1442WC Dishwasher