Home > scandomestic > Scandomestic DWB1442WC Dishwasher

Scandomestic DWB1442WC Dishwasher

Water supply and drain  
Cold water connection  
Connect the cold water supply hose to a threaded  
3/4(inch) connector and make sure that it is fastened  
tightly in place.  
If the water pipes are new or have not been used for an  
extended period of time, let the water run to make sure  
that the water is clear. This precaution is needed to avoid the risk of the water  
inlet to be blocked and damage the appliance.  
About the safety supply hose  
The safety supply hose consists of the double walls. The system  
guarantees its intervention by blocking the flow of water in case of  
the supply hose breaking and when the air space between the  
supply hose itself and the outer corrugated hose is full of water.  
Warning  
A hose that attaches to a tap can burst if it is installed on the same  
water line as the dishwasher. If your sink has one, it is  
recommended that the hose is disconnected and the hole plugged.  
How to connect the safety supply hose  
Pull the safety supply hoses out from storage compartment located at rear of  
dishwasher.  
Tighten the screws of the safety supply hose to the faucet with thread 3/4inch.  
Turn the water fully on before starting the dishwasher.  
How to disconnect the safety supply hose  
Turn off the water.  
Unscrew the safety supply hose from the faucet.  
GeneralDetails
NameScandomestic DWB1442WC Dishwasher
Makescandomestic
LanguageEnglish
FiletypePDF (Download)
File size2.14 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Scandomestic DWB1442WC Dishwasher