Whirlpool 400011655817 E Dishwasher
EN
CAPACITY: 14 standard place-settings
LOADING THE RACKS
TOP RACK
LOWER RACK
The top rack provides
a targeted cleaning
Wash Zone for bowls,
mugs, even big
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should ide-
ally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical position
when arranging plates or in a horizontal position (lower) to load pans and
salad bowls easily.
plates and cutlery
that you’d normally
load in the lower
racks, making extra
space for the rest of
the day’s dishes.
A separate arrangement of the cutlery makes
collection easier after washing and improves
washing and drying performance.
Knives and other utensils with sharp edges
must be positioned with the blades facing
downwards.
(loading example for the lower rack)
POWER CLEAN®
Power Clean® uses the special water jets in
the rear of cavity to wash more intensively
the high dirty items. The lower rack has a
Space Zone, a special pull-out support in the
rear of the rack that can be used to support
frying pans or baking pans in upright posi-
tion, thus taking up less space.
UPPER RACK
Load delicate and light dishes: glasses, cups,
saucers, low salad bowls.
The upper rack has tip-up supports which can
be used in a vertical position when arranging
tea/ dessert saucers or in a lower position to
load bowls and food containers.
Placing the pots/casseroles faced to the
Power Clean® component please activate the
POWER CLEAN® on the panel.
(loading example for the upper rack)
How to use Power Clean®:
1. Adjust the Power Clean® area G folding
down the rear plate holders to load pots.
2. Load pots and casseroles inclined vertical-
ly in Power Clean® area. Pots have to be in-
clined towards the power water jets.
Adjusting the height of the upper rack
The height of the upper rack can be adjusted: a high posi-
tion to place bulky crockery in the lower basket and a low
position to make the most of the tip-up supports by cre-
ating more space upwards and avoiding collision with the
items loaded into the lower rack.
The upper rack is equipped with an Upper Rack height
adjuster (see figure), without pressing the levers, lift it up
by simply holding the rack sides, as soon as the rack is sta-
ble in its upper position. To restore to the lower position,
press the levers A at the sides of the rack and move the
basket downwards.
Cutlery basket
It is fitted with top grids for
improved cutlery arrangement.
It must only be positioned at
the front of the lower rack.
Knives and other utensils with
sharp edges must be placed
in the cutlery basket with the
points facing downwards or
they must be positioned hori-
zontally in the tip-up compartments on the upper rack.
We strongly recommend that you do not adjust the height of the rack
when it is loaded. NEVER raise or lower the basket on one side only.
Foldable flaps with adjustable position
The side foldable flaps can be folded or unfolded
to optimize the arrangement of crockery inside
the rack. Wine glasses can be placed safely in the
foldable flaps by inserting the stem of each glass
into the corresponding slots.
Depending on the model:
• to unfold the flap there is needed to slide it up
and rotate or release it from the snaps and pull
it down.
• to fold the flap there is needed to rotate it and
slide the flap down or pull it up and attach the
flap to the snaps.
CARE AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
Regularly clean the filter assembly so that the filters do not clog and that
the waste water flows away correctly.
Using the dishwasher with clogged filters or foreign objects inside the fil-
tration system or spray arms may cause unit malfunction resulting in loss of
performance, noisy work or higher resources usage.
The filter assembly consists of three filters which remove food residues
from the washing water and then recirculate the water.
B
The dishwasher must not be used without filters or if the filter is loose.
A
At least once per month or after every 30 cycles, check the filter assembly
and if necessary clean it thoroughly under running water, using a non-me-
tallic brush and following the instructions below:
A
1
2
1. Turn the cylindrical filter A in an anti-clockwise direction and pull it out
(Fig 1). It is important when reinstalling the filter that the two trian-
gles shown on the zoom meet.
2. Remove the cup filter B by exerting a slight pressure on the side flaps
(Fig 2).
3. Slide out the stainless-steel plate filter C (Fig 3).
4. In case you find foreign objects (such as broken glass, porcelain,
bones, fruit seeds etc.) please remove them carefully.
5. Inspect the trap and remove any food residues. NEVER REMOVE the
wash-cycle pump protection (shown by an arrow) (Fig 4).
After cleaning the filters, replace the filter assembly and fix it in
position correctly; this is essential for maintaining the efficient
operation of the dishwasher.
C
4
3
4
| General | Details |
|---|---|
| Name | Whirlpool 400011655817 E Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 106.63 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool W11049299A Dishwasher
ASKO DFI5558MKXXL Dishwasher
BOSCH SMV4HTX27G-55 Dishwasher
FISHER AND PAYKEL DD24SCTW9 DishDrawer Dishwasher
BOSCH SGX78B55UC Smart Dishwasher
BOSCH SHX3AR Dishwasher
SIEMENS SN55ZS02BD Dishwasher
LG DFB424 Dishwasher
BOSCH SMS4EVW02E Dishwasher
SIEMENS SN23EW04MG Free Standing Dishwasher
ARDESTO DWMF-V608SMHDS Dishwasher