Whirlpool W7U HS31 X Dishwasher
Daily Reference Guide
EN
PROGRAMS TABLE
Water
con-
Energy
con-
sumption
Duration
of wash
program
(h: min)**)
Available
options *)
Programs description
sumption
(litres/cycle) (kWh/cycle)
Eco 50°- Program is suitable to clean normally soiled tablewa-
re, that for this use, it is the most efficient program in terms of
its combined energy and water consumption, and that it is used
to assess compliance with the EU Ecodesign legislation.
3:30
9.5
0.86
Auto Intensive 65° - Automatic pro-
gram for heavily soiled dishes and pans.
2:25 - 3:10
1:20 - 3:00
15.5 - 24.5
7.5 - 19.5
1.30 - 1.70
0.75 - 1.20
Senses the level of
soiling on the dishes
and adjusts the
program accordingly.
When the sensor is
detecting the soil
level an animation
appears in the display
and the cycle duration
is updated.
Auto Mixed 55° - Automatic program
for normally soiled dishes with dried
food residues.
Auto Fast 50° - Automatic program
for normally and lightly soiled dishes.
The everyday cycle that ensures optimal
cleaning and drying performance in a
shorter time.
1:00 - 1:50
0:30 - 0:40
7.5 - 15.5
0.70 - 1.10
0.55 - 0.65
Rapid 45° - Program is recommended for limited amount
of lightly-soiled dishes with no dried food residues. Does not
include the drying phase.
10.0 - 12.0
-
Crystals 45° - Program for delicate items, which are more
sensitive to high temperatures, for example, glasses and cups.
1:40 - 1:50
0:12
12.5 - 16.5
4.5
0.95 - 1.20
0.10
Prewash - Use to refresh crockery planned to be washed later.
No detergent is to be used with this program.
-
-
Self-Clean 65° - Program to be used to perform maintenance
of the dishwasher, to be carried out only when the dishwasher
is EMPTY using specific detergents designed for dishwasher
maintenance.
1:15
11.0
1.10
-
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration by up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up)
(see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and
beeps will sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
POWER CLEAN® - Thanks to the additional power jets this option
provides a more intensive and powerful wash in the lower rack, in the
specific area. This option is recommended for washing pots and casseroles
(Please refer to the Power Clean® loading section).
DELAY - The start of the program may be delayed for a period of
time between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
2. Close the door and press the START/Pause button. The timer will begin
counting down.
HALF LOAD - If there are not many dishes to be washed, HALF LOAD is
used to save water, electricity or time depending on the selected
program. Remember to reduce the amount of detergent.
3. Once this time has elapsed, the indicator light switches off and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
EXTRA DRY - The higher temperature during the final rinse and the
extended drying phase allows for improved drying. The EXTRA DRY
option results in the lengthening of the wash cycle.
DESCALE – Alarm - Limescale accumulation was detected on internal
components of the appliance. Check if the Water Hardness Setting is
at the correct value and salt is present in the salt container (see FIRST TIME
USE), then use a descaling product (WPro brand is recommended) with
Self-Clean program. After a successful descaling, the icon will stop being
displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display)
and then will be BLOCKED to prevent component damage, with only
the Self-Clean program available. Performing a full descaling will unblock
the product. In the case of extremely high amounts of limescale, descaling
may have to be performed twice to be efficient.
SILENT - Suitable for night-time operation of the appliance.This option
can be used to limit noise emissions during wash phases. It will increase
cycle time depending on base cycle selection.
SANI RINSE - This option can be used to sanitize washed dishes. It will
increase the final rinse temperature and add an antibacterial wash to
the selected program. Ideal to clean crockery and feeding bottles. The
dishwasher door must be kept shut for the entire duration of the program
in order to guarantee a reduction of germs.
WARNING: the crockery and plates could be extremely hot at the end
of the cycle.
SENSING - When the sensor is detecting the soil level an
animation appears in the display (around 20 min.) and the cycle
duration is updated. SENSING is for the level of soiling on the dishes and it
is present for all cycles (excepting Eco) adjusting the program accordingly.
NaturalDry - It is a convection drying system which automatically opens
the door during/after the drying phase to ensure exceptional drying
performance every day. The door opens at a temperature that is safe to
your kitchen furniture, thus door will not be opened when the option of
SANI RINSE is on.
As additional steam protection, specially designed protection foil is added
together with the dishwasher.
KEYLOCK - A long press (for 3 seconds) of SILENT button, will activate
the KEYLOCK function. The KEYLOCK function will block the control panel
except for the ON/OFF button. To deactivate the KEYLOCK, long press again.
To see how to mount protection foil please refer to the INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in
the “SETTINGS MENU”.
WATER TAP CLOSED – Alarm - Flashes, when there is no inlet water or
water tap is closed.
3
| General | Details |
|---|---|
| Name | Whirlpool W7U HS31 X Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.22 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
Whirlpool W11049299A Dishwasher
Miele G 7191 SCVi AD 125 Dishwasher
FORTE F18DWS250SS 18 Inch Dishwasher
Bosch SMS4ETW02E Dishwasher
BOSCH SGI4HCS48E Semi Integrated Dishwasher
maxima HQ-400 Undercounter Dishwasher
Haier HDW15V2S1 Dishwasher
Fisher and Paykel DD60D2NX9 Built-Under Dishwasher
BOSCH SMI2ITS33E Dishwasher
FISHER and PAYKEL DD24STX6HI1 Dishwasher
BOSCH SMH6ZCX03E Dishwasher