Whirlpool WFC 3C26 Dishwasher
Daily Reference Guide
DESCALE – Alarm - Limescale accumulation was detected on the in-
EN
CYCLE COUNTER - This feature shows the number of cycles the
ternal components of the appliance. Check if the Water Hardness
dishwasher has performed.
Setting is at the correct value and salt is present in the salt container (see For the number of cycles from 0-999, a fixed number will be displayed.
FIRST TIME USE), then use a descaling product (WPro brand is recommend-
Example for 25 cycles.
ed) with the Self-Clean program. After a successful descaling, the icon will
When the cycle number is higher than 1000, the number will scroll in
the display. The “_” represents the “.”, as for instance: 1.000 = 1_000,
stop being displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display)
and then will be BLOCKED to prevent component damage, with only
the Self-Clean program available. Performing a full descaling will unblock
the product. In the case of extremely high amounts of limescale, descaling
may have to be performed twice to be efficient.
13.947= 13_947 (the number will scroll for 3 times).
Example for
13.947 cycles:
After the cycle visualization, the display will return to visualize
„
”.
NOTE: The dishwasher may have already performed about 30 cycles.
This is due to the extended quality process carried out during
production. It guarantees higher product quality.
CAPACITY: 15 standard place-settings
LOADING THE RACKS
TOP RACK
LOWER RACK
The top rack pro-
For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should ideal-
ly be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical position
when arranging plates or in a horizontal position (lower) to load pans and
salad bowls easily.
vides
a
targeted
cleaning Wash Zone
for bowls, mugs,
even big plates and
cutlery that you’d
normally load in the
lower racks, making
extra space for the rest of the day’s dishes.
A separate arrangement of the cutlery makes
collection easier after washing and improves
washing and drying performance.
Knives and other utensils with sharp edges
must be positioned with the blades facing
downwards.
(loading example for the lower rack)
POWER CLEAN®
UPPER RACK
Power Clean® uses the special water jets in
the rear of cavity to wash more intensive-
ly the high dirty items. The lower rack has
a Space Zone, a special pull-out support
in the rear of the rack that can be used to
support frying pans or baking pans in up-
right position, thus taking up less space.
Placing the pots/casseroles faced to the
Power Clean® component please activate
the POWER CLEAN® on the panel.
How to use the Power Clean®:
Load delicate and light dishes: glasses, cups,
saucers, low salad bowls.
The upper rack has tip-up supports which can
be used in a vertical position when arranging
tea/ dessert saucers or in a lower position to
load bowls and food containers.
(loading example for the upper rack)
ADJUSTING THE HEIGHT OF THE UPPER RACK
The height of the upper rack can be adjusted: a high po-
sition to place bulky crockery in the lower basket and
a low position to make the most of the tip-up supports
by creating more space upwards and avoiding collision
with the items loaded into the lower rack.
1. Adjust the Power Clean® area G folding
down the rear plate holders to load pots.
2. Load pots and casseroles inclined ver-
tically in the Power Clean® area. Pots
have to be inclined towards the power-
ful water jets.
The upper rack is equipped with an Upper Rack height
adjuster (see figure), without pressing the levers, lift it
up by simply holding the rack sides, as soon as the rack
is stable in its upper position. To restore to the lower
position, press the levers A at the sides of the rack and move the basket
downwards.
CUTLERY BASKET
It is fitted with top grids for im-
proved cutlery arrangement.
It must only be positioned at the
front of the lower rack.
We strongly recommend that you do not adjust the height of the rack
when it is loaded. NEVER raise or lower the basket on one side only.
Knives and other utensils with
sharp edges must be placed
in the cutlery basket with the
points facing downwards or they must be positioned horizontally in
the tip-up compartments on the upper rack.
FOLDABLE FLAPS WITH ADJUSTABLE POSITION
The side foldable flaps can be folded or unfold-
ed to optimize the arrangement of crockery in-
side the rack. Wine glasses can be placed safely
in the foldable flaps by inserting the stem of
each glass into the corresponding slots.
In the case of the high position of the upper
rack, flaps cannot remain in the vertical position.
Depending on the model:
• to unfold the flap there is needed to slide it up
and rotate or release it from the snaps and pull
it down.
• to fold the flap there is needed to rotate it and
slide flap down or pull it up and attach flap to the snaps.
5
| General | Details |
|---|---|
| Name | Whirlpool WFC 3C26 Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 135.73 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
smeg DI324AQ Full Size Dishwasher
BOSCH SPH4HKX10E 45 cm Dishwasher
SIEMENS SR65YX11ME Dishwasher
BOSCH SMH8ZCX01E 60 cm Dishwasher
BOSCH SMS6ZDW48E Dishwasher
COMFEE TD802 Table Top Dishwasher
BOSCH SMV8ZCX00X Dishwasher
FISHER and PAYKEL DD24DHTI9N Tall Drawer Dishwasher
Whirlpool DU1014XTXQ Dishwasher
Fisher and Paykel DW60UD6X Built-Under Dishwasher