Whirlpool WFE 2B19 X UK Dishwasher
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
MULTIZONE
TABLET (Tab)
If there are not many dishes to be washed, a half loading may
be used in order to save water, electricity and detergent.
Select the program and then press the MULTIZONE button:
the symbol of the chosen rack will appear on the display. By
default the appliance washes dishes in all racks.
To wash only the specific rack, press this button repeatedly:
This setting allows you to optimize the performance of the
program according to the type of detergent used.
Press the START/PAUSE button for 3 seconds (the correspond-
ing symbol will light up) if you use combined detergents in
tablet form (rinse aid, salt and detergent in 1 dose).
If you use powder or liquid detergent, this option should
be off.
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
NaturalDry
NaturalDry is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying per-
formance every day. Door opens at the temperature that is safe to your
kitchen furniture.
shown on the display (option is OFF and the appliance will
wash dishes in all racks).
As additional steam protection, special designed protection foil is add-
ed together with the dishwasher. To see how to mount protection foil
please refer to (INSTALLATION GUIDE).
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent directly
to tub instead of detergent dispenser.
NaturalDry functionality could be disabled by the user as follows:
1. Go to the Dishwasher software menu pressing and holding P
button (6 sec).
2. You switched to NaturalDry Control Menu, you could change status
of NaturalDry functionality by pressing P button:
DELAY
The start time of the program may be delayed for a period of
time between 1 and 12 hours.
E – enabled
d – disabled
To confirm the change and exit from the Control Menu please press and
hold P button (3 sec).
1. Press the DELAY button: the corresponding «h» symbol
appears on the display; each time you press the button,
the time (1h, 2h, etc. up to max. 12h) from the start of the
selected wash cycle will be increased.
2. Select the wash program, press the START/PAUSE button
and within 4 seconds close the door: the timer will begin
counting down.
3. Once this time has elapsed, the indicator light «h» switches
off and the wash cycle begins.
To adjust the delay time and select a shorter period of
time, press the DELAY button. To cancel it, press the button
repeatedly until the selected delayed start indicator light «h»
switches off.
The DELAY function cannot be set once a wash cycle has
been started.
4
| General | Details |
|---|---|
| Name | Whirlpool WFE 2B19 X UK Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 36.92 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
SAMSUNG DW9000F Dishwasher
Whirlpool WDT550SAPW Dishwasher
Whirlpool 400011659130 Dishwasher
smeg STL233CLH Universale Totally dishwasher
smeg LSPU8643WH Dishwasher
IGNIS IG2IE10CS8A0 Fully Dishwasher
KitchenAid KDPM604KPS Dishwasher
Electrolux GA60SLICCN Dishwasher
IKEA HYGIENISK Dishwasher
VALBERG XAD929C Dishwasher