Whirlpool WFO3O33PLAUS Standard Dishwasher
OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times
and beeps will sound. The option will not be enabled.
MULTIZONE
TABLET
This setting allows you to optimize the performance of the
program according to the type of detergent used.
A press of the TABLET button, will activate the function (the
corresponding symbol will light up) if you use combined de-
tergents in tablet form (rinse aid, salt and detergent in 1 dose).
If there are not many dishes to be washed, a half loading may be
used in order to save water, electricity and detergent.
Select the program and then press the MULTIZONE button:
the indicator over the button lights up and the symbol of the
chosen rack will appear on the display.
If you use powder or liquid detergent, this option should
be off.
By default the appliance washes dishes in all racks.
To wash only the specific rack, press this button repeatedly:
shown on the display (only lower rack)
shown on the display (only upper rack)
shown on the display (only cutlery rack)
DELAY
The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the
DELAY button (repeatedly) to delay the start of the program.
Adjustable from 0:30 to 24 hours. With each press of the
button, the delay start increases by: 0:30 if selection below
4 hours, 1:00 if selection is below 12 hours, 4 hours if
selection is above 12 hours. If 24 hours reached, and the
button is pressed, the delayed start is deactivated.
2. Press the START/PAUSE button: the timer will begin counting
down;
shown on the display (option is OFF and the appliance will wash
dishes in all racks).
Remember to load the upper or lower rack only, and to
reduce the amount of detergent accordingly.
If upper rack is removed, please apply detergent directly to
tub instead of detergent dispenser.
3. Once this time has elapsed, the indicator light switches off
and the program begins automatically.
TURBO
This option can be used to reduce the duration of the main
programs while maintaining the same washing and drying
performance levels. After selecting the program, press the
TURBO button and the indicator light will switch on. To dese-
lect the option, press the same button again.
If at the time of the countdown the START/PAUSE button is
pressed again the DELAY option is cancelled and the selected
program starts automatically.
The DELAY function cannot be set once a program has
been started.
KEYLOCK
A long press (for 3 seconds) of TURBO button, will activate the
KEYLOCK function. The KEYLOCK function will block the control
panel except the ON/OFF button. To deactivate the KEYLOCK,
long press again.
DRAIN OUT
To stop and cancel the active cycle, the Drain Out function can
be used. A long press of START/PAUSE button, will activate the
DRAIN OUT function. The active program will be stopped and
the water in the dishwasher will be drained out.
WATER TAP CLOSED – Alarm
Flashes when there is no inlet water or water tap is closed.
NaturalDry
POWER CLEAN®
NaturalDry is a convection drying system which automatically opens
the door during/after drying phase to ensure exceptional drying
performance every day. Door opens at the temperature that is safe to
your kitchen furniture.
Thanks to the additional power jets this option provides a
more intensive and powerful wash in the lower rack, in the
specific area. This option is recommended for washing pots
and casseroles. Press this button to activate POWER CLEAN®
(the indicator lights up).
As additional steam protection, special designed protection foil is added
together with the dishwasher (depending on the model type - can be
the need to buy it). To see how to mount protection foil please refer to
(INSTALLATION GUIDE).
NaturalDry functionality could be disabled by the user as follows:
• To DISABLE: Switch On, then switch Off. Keep the P button pressed for
5 sec., at the end of 5 sec the dishwasher plays a short beep. Switch
On the machine, the display shows„oOF”.
• To ENABLE: Switch On, then switch Off the machine. Keep the P button
pressed for 5 sec., at the end of 5 sec the dishwasher plays a short beep.
Switch On the machine, the display shows„oOn”.
4
| General | Details |
|---|---|
| Name | Whirlpool WFO3O33PLAUS Standard Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.86 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool WH7IPC15BM60 Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
Whirlpool W11049299A Dishwasher
WASHTECH XP Dishwasher
ARTUSI ADWFI700 Dishwasher
maidaid halcyon AMH91 Pass Through Gravity Drain Dishwasher
BOSCH SPI4ELS01D Dishwasher
MAYTAG W11680100B Dishwasher
BOSCH SMV4EAX23E 60 cm Dishwasher
BOSCH SMI4ECS22E Dishwasher
BOSCH SPV6EMX76Q Dishwasher
Haier HDW15U3S1 Built Under Dishwasher
FISHER PAYKEL ADDD60DTPX Door Panel for Dishwasher