Whirlpool WH7IPC15BM60 Dishwasher
Daily Reference Guide
EN
PROGRAMS TABLE
Duration
of wash
program
(h:min)**)
Water
Energy
Programs description
Available options *)
consumption consumption
(litres/cycle) (kWh/cycle)
Eco 50°- Program is suitable to clean normally soiled tableware, that
for this use, it is the most efficient program in terms of its combined
energy and water consumption, and that it is used to assess compli-
ance with the EU Ecodesign legislation.
3:30
9.5
0.76
P1
Senses the level of soil-
ing on the dishes and
adjusts the program
accordingly. When the
sensor is detecting the
Auto Intensive 65° - Automatic program
2:25-3:10
1:20-3:00
15.5-24.5
7.5-19.5
1.30-1.70
0.75-1.20
P2
P3
for heavily soiled dishes and pans.
Auto Mixed 55° - Automatic program for nor-
mally soiled dishes with dried food residues.
Auto Fast 50° - Automatic program for nor- soil level an animation
mally and lightly soiled dishes. The everyday appears in the display
cycle that ensures optimal cleaning and dry- and the cycle duration
1:00-1:50
7.5-15.5
0.70-1.10
P4
ing performance in a shorter time.
is updated.
Rapid 45° - Program is recommended for limited amount of light-
ly-soiled dishes with no dried food residues. Does not include the
drying phase.
0:30-0:40
1:40-1:50
3:50-4:10
10-12
0.55-0.65
0.95-1.20
0.80-1.15
-
P5
P6
P7
Crystals 45° - Program for delicate items, which are more sensitive to
12.5-16.5
10.5-14.5
high temperatures, for example, glasses and cups.
Silent 55° - Suitable for night-time operation of the appliance.
Ensures optimal cleaning and drying performance with the lowest
noise emission.
Sanitizing 65° - Normally or heavily soiled crockery, with additional an-
1:55-2:10
0:12
12-19
4.5
1.40-1.80
0.10
-
P8
P9
tibacterial wash. Can be used to perform maintenance of the dishwasher.
Prewash - Used to refresh crockery planned to be washed later.
No detergent is to be used with this program.
-
-
Self Clean 65° - Program to be used to perform maintenance of the
dishwasher, to be carried out only when the dishwasher is EMPTY
using specific detergents designed for dishwasher maintenance.
1:15
11.0
1.10
-
P10
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following address: dw_test_support@whirlpool.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration by up to 20 min.
OPTIONS AND FUNCTIONS
OPTIONS can be selected/ deselected, after choosing the program, directly by pressing the corresponding button (if available - the indicator lights up)
(see CONTROL PANEL). If an option is not compatible with the selected program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times and beeps
will sound. The option will not be enabled. An option can change time or water or energy consumption for the program.
POWER CLEAN® - Thanks to the additional power jets this option NaturalDry - It is a convection drying system which automatically opens
provides a more intensive and powerful wash in the lower rack, in the the door during/after the drying phase to ensure exceptional drying per-
specific area. This option is recommended for washing pots and casseroles formance every day. The door opens at a temperature that is safe to your
(please refer to the Power Clean®in loading section).
kitchen furniture.
As additional steam protection, specially designed protection foil is added
together with the dishwasher.
HALF LOAD - If there are not many dishes to be washed, HALF LOAD is
used to save water, electricity or time, depending on the selected
program. Remember to reduce the amount of detergent.
To see how to mount protection foil please refer to INSTALLATION GUIDE.
This feature is active by default, but it is possible to deactivate it in the
“SETTINGS MENU”.
EXTRA DRY - The higher temperature during the final rinse and the
extended drying phase which allows for improved drying. The EXTRA
DRY option results in the lengthening of the wash cycle.
DESCALE – Alarm - Limescale accumulation was detected on the in-
ternal components of the appliance. Check if the Water Hardness
Setting is at the correct value and salt is present in the salt container (see
FIRST TIME USE), then use a descaling product (WPro brand is recommend-
ed) with the Self-Clean program. After a successful descaling, the icon will
stop being displayed.
If the actions above are not performed, product performance will deteriorate.
DESCALE warning will start blinking and «dES» alarm will appear on the
display. If still no action is taken, the appliance will only allow a certain
number of cycles to be started (indicated during «dES» alarm display)
and then will be BLOCKED to prevent component damage, with only
the Self-Clean program available. Performing a full descaling will unblock
the product. In the case of extremely high amounts of limescale, descaling
may have to be performed twice to be efficient.
DELAY - The start of the program may be delayed for a period of time
between 0:30 and 24 hours.
1. Select the program and any desired options. Press the DELAY button
(repeatedly) to delay the start of the program. Adjustable from 0:30 to 24
hours. Once the 24 hours setting is reached, press the DELAY another time
to deactivate the DELAY function.
2. Press the START/Pause button and close the door within 4 sec. the timer
will begin counting down.
3. Once this time has elapsed, the indicator light switches off and the program
begins automatically.
The DELAY function cannot be set once a program has been started.
SENSING - When the sensor is detecting the soil level an anima-
tion appears in the display (around 20 min.) and the cycle duration
is updated. SENSING is for the level of soiling on the dishes and
it is present for all cycles (excepting Eco) adjusting the program accordingly.
FAVOURITE PROGRAM - The FAVOURITE program may be saved and
will be easily accessible. Find the program using PREVIOUS/NEXT, and
then press the FAVOURITE program button for 3 seconds.
WATER TAP CLOSED – Alarm - Flashes when there is no inlet water or
water tap is closed.
3
| General | Details |
|---|---|
| Name | Whirlpool WH7IPC15BM60 Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 33.81 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool 2B19 Dishwasher
Whirlpool WFO3O33PLAUS Standard Dishwasher
Whirlpool W11323304G Dishwasher
Whirlpool FINPUTSAD Dishwasher
Whirlpool W7U HS31 X Dishwasher
Whirlpool Thron Dishwasher
Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher
Whirlpool WRF540CWHZ Dishwasher
Whirlpool WDF130PAHB Dishwasher
Whirlpool W11049299A Dishwasher
smeg DWAU6224N4 Matte Black Underbench Dishwasher
FISHER AND PAYKEL DD24DHTI9 N Tall Dishwasher
SAMSUNG DW80R9950 Dishwasher
Westinghouse WSF6602XB 14 Place Dishwasher
Whirlpool HD524 Dishwasher
GAGGENAU 8001221619 C Dishwasher
omega OFI101X Dishwasher
Hotpoint 869991662940 Dishwasher
FOTILE BD2B-G5 Dishwasher
Miele PG 8056-1 U Built Under Fresh Water Dishwasher