ZLINE 65286410 Monument Dishwasher
BEFORE INSTALLATION
CONNECTING THE WATER LINE TO THE WATER SUPPLY
1. Turn off the home’s water supply before installing this dishwasher.
2. Install a hand shut-off valve in an accessible location, such as under the sink. This is
optional, but strongly recommended, and may be required by local codes. A hand
shut-off valve can be purchased at most hardware stores.
3. Install the hot water inlet line, using at least 3/8" (10 mm) tubing. Route the line as
shown in the figure on page 13 and extend it forward at least 18" (457 mm) from
the rear wall of the enclosure.
4. Adjust the water heater to a temperature between 120°F and 150°F (49°C and
65°C).
5. Flush the water line to clean out any debris.
NOTE: The hot water pressure must be between 20 and 120 psi (138 and 827 kPa).
14
| General | Details |
|---|---|
| Name | ZLINE 65286410 Monument Dishwasher |
| Make | Zline |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.56 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ZLINE Monument Top Touch Dishwasher
ZLINE Monument Series 24 Red Matte Dishwasher
ZLINE 65286411 Monument Dishwasher
ZLINE Classic Dishwasher
ZLINE DWV-18 Tallac Dishwasher
FISHER AND PAYKEL DD24SHTI9 N Tall Dish Drawer Dishwasher
FISHER PAYKEL DW24U6I1 Sanitize Integrated Dishwasher
ELEKTRO MARKABOLT S175ECX13E Dishwasher
AEG FSK73767P Dishwasher
BOSCH SPV4EMX25E Dishwasher
KitchenAid KDTF324PPA Dishwasher
BOSCH SHE3AEM2N Dishwasher
FISHER PAYKEL DD24SCTW9N Dishwasher
BOSCH SHE78CM5N Recessed Handle Dishwasher
BOSCH SPS4HMI49E Dishwasher