AEG FFB32617ZW Dishwasher
22
Problem and alarm code
Possible cause and solution
The level of water inside the
appliance is too high.
The display shows iF1.
•
•
•
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right
height above the floor. Refer to the installation instruc‐
tions.
The appliance stops and
starts more times during op‐
eration.
•
It is normal. It provides optimal cleaning results and en‐
ergy savings.
The programme lasts too
long.
•
•
If the delayed start is set, cancel the delay setting or
wait for the end of the countdown.
The displayed programme
duration is different than the
duration in the consumption
values table.
The pressure and the temperature of the water, the var‐
iations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the pro‐
gramme duration.
The remaining time in the
display increases and skips
nearly to the end of pro‐
gramme time.
•
This is not a defect. The appliance is working correctly.
Small leak from the appli‐
ance door.
•
•
The appliance is not levelled. Loosen or tighten the ad‐
justable feet (if applicable).
The appliance door is not centred on the tub. Adjust the
rear foot (if applicable).
The appliance door is diffi‐
cult to close.
•
The appliance is not levelled. Loosen or tighten the ad‐
justable feet (if applicable).
•
•
Parts of the tableware are protruding from the baskets.
The appliance door opens
during the wash cycle.
The AirDry function is activated. You can deactivate the
function. Refer to "Settings".
Rattling/knocking sounds
from inside the appliance.
•
The tableware is not properly arranged in the baskets.
Refer to basket loading leaflet.
•
•
M
a
k
e
s
u
r
e
t
h
a
t
t
h
e
s
p
r
a
y
a
r
m
s
c
a
n
r
o
t
a
t
e
f
r
e
e
l
y
.
The appliance trips the cir‐
cuit-beaker.
The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian‐
ces in use.
Internal electrical fault of the appliance. Contact an Au‐
thorised Service Centre.
•
the problem occurs again, contact an
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
Once you have checked the appliance,
deactivate and activate the appliance. If
| General | Details |
|---|---|
| Name | AEG FFB32617ZW Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.51 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
BOSCH SMS46DI00M Dishwasher
MAYTAG MDB4949SD Series Undercounter Dishwasher
JENNAIR W11680101A Dishwasher
BOSCH SMD8YCX02G Dishwasher
Hotpoint H8I HP42 Dishwasher
BOSCH SMH4ECX10E/01 Fully Dishwasher
NEFF S975HKX20G Fully Int Slimline Dishwasher
Hotpoint H7F HS41 UK Full Size Dishwasher
IKEA MEDELSTOR Dishwasher
FISHER AND PAYKEL DW60UT4I2 Dishwasher