AEG FSK93847P Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

EN User Manual  

FSK93847P  

Dishwasher  

USER  

MANUAL  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	AEG FSK93847P Dishwasher
Make	AEG
Language	English
Filetype	PDF (Download)
File size	1.06 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• AEG
• ALL DISHWASHER INSTRUCTIONS & USER MANUALS

AEG FSK93847P Dishwasher Overview

Summary of Contents

• Page 1: User manual for the FSK93847P dishwasher.
• Page 2: SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of non-compliance with the instructions. Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler. Please spend a few minutes reading to get the very best from it. Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. General information and tips are provided. Environmental information is included.
• Page 3: Children and vulnerable people safety This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities if they have been given supervision or instruction. Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. Children should be supervised to ensure that they do not play with the appliance. Keep detergents away from children. Keep children and pets away from the appliance when the door is open. Children shall not carry out cleaning and user maintenance of the appliance without supervision. General safety This appliance is for cleaning household-type dishes and tableware only. This appliance is designed for single household domestic use in an indoor environment.
• Page 4: Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Always use a correctly installed shockproof socket. Do not use multi-plug adapters and extension cables. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Dishwasher detergents are dangerous. Follow the safety instructions on the detergent packaging. Do not remove the dishes from the appliance until the programme is complete. The appliance can release hot steam if you open the door while a programme operates. This appliance is fitted with a 13 A mains plug. To repair the appliance contact the Authorised Service Centre.
• Page 5: Aquastops, structural and interior conditions in household appliances are affected by temperature, vibration, and humidity. Some spare parts are only available to professional repairers, and not all spare parts are relevant for all models. Spare parts available for 10 years after the model has been discontinued include door hinges and seals, spray arms, drain filters, and interior racks. The lamps inside this product are intended for extreme physical applications and are not suitable for household room illumination. Disconnect the appliance from the mains supply before disposal. Cut off the mains cable and discard it during disposal. Remove the door catch to prevent children and pets from getting closed in the appliance. The product description includes components such as the ceiling spray arm, upper spray arm, lower spray arm, filters, and rating plate. Additional components listed are the salt container, air vent, rinse aid dispenser, detergent dispenser, comfort lift basket, and trigger handle. The lower basket handle is also part of the product description.
• Page 6: Upper basket Cutlery drawer The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. The display shows the following information: ECOMETER indicates the most environmentally friendly programme selection for a normally soiled dishwashing load. Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. On/Off button / Reset button Delay Start button AUTO Sense program button MY TIME selection bar
• Page 7: Salt indicator indicates when the salt container needs refilling. Machine Care indicator signals when internal cleaning is required. Drying phase indicator shows when a drying phase is selected and operates. Delay Start indicator is active when a delay start is set. Pause indicator flashes when a wash cycle is paused. Alert indicators indicate a malfunction of the appliance. The standard programme is designed for energy and water consumption for normal soil. MY TIME selection bar allows for choosing a dishwashing cycle based on duration. AUTO Sense programme automatically adjusts the cycle based on load type and soil degree. ExtraSilent option reduces noise during operation, extending programme duration.
• Page 8: ExtraPower improves the dishwashing results of the selected programme by increasing the wash temperature and duration. GlassCare prevents delicate glassware from damaging by preventing rapid changes in dishwashing temperature and reducing it to 45 °C. Programmes overview includes various options for different types of loads and soil levels. The Quick programme is suitable for crockery and cutlery with fresh, lightly dried-on soil, using a 50 °C wash. The ExtraPower option can be added to enhance the cleaning of lightly soiled items. The ECO programme is designed for heavy, dried-on pans and operates at 60 °C. The ExtraSilent programme operates at 50 °C and is suitable for normal loads. AUTO Sense adjusts the wash cycle based on the load, operating between 50 - 60 °C. Machine Care is intended for cleaning the appliance interior, with a cleaning cycle at 70 °C.
• Page 9: Consumption values include water, energy, and duration for various programmes. The pressure, temperature, mains supply variations, options, quantity of dishes, and degree of soil can change the values. Values for programmes other than ECO are indicative only. To receive information for conducting performance tests, include the product number code from the rating plate. You can configure the appliance by changing basic settings according to your needs. Adjust the level of the water softener according to the water hardness in your area. Adjust the level of the rinse aid according to the necessary dosage. Activate or deactivate the acoustic signal for the end of a programme. Activate or deactivate AirDry. Activate or deactivate the sound of the buttons when pressed.
• Page 10: Settings Enable or disable the automatic selection of the most recently used programme and options. Activate or deactivate TimeBeam. Adjust the brightness of the display. Set the preferred language. Reset the appliance to the factory settings. Check the PNC number of your appliance. To enter setting mode, press and hold simultaneously for about 3 seconds. You can navigate in setting mode using the MY TIME selection bar. Make sure the appliance is in setting mode to change a setting. The saved settings remain valid until you change them again.
• Page 11: The water softener should be adjusted according to the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results. The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance. Water hardness is measured in equivalent scales. Multi-tabs containing salt are not effective enough to soften hard water. For the correct water softener operation, the resin of the softener device needs to be regenerated regularly. This regeneration process is automatic and is part of the normal dishwasher operation. Regardless of the type of detergent used, set the proper water hardness level to keep the salt refill indicator active. The higher the content of these minerals, the harder your water is. Your local water authority can advise you on the hardness of the water in your area.
• Page 12: Rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. The rinse aid dispenser shows an indicator when empty. For best drying performance, always use rinse aid and keep the notification active. Deactivating the rinse aid dispenser can be done by setting the rinse aid level to 0. Rinsing of the water softener may increase total water and energy consumption. An acoustic signal sounds when the programme is completed or if a malfunction occurs. AirDry improves drying results by automatically opening the appliance door during the drying phase. All consumption values are determined under specific laboratory conditions. AirDry is automatically activated with all programmes.
• Page 13: The duration of the drying phase and door opening time vary depending on the selected programme and options. The programme duration when the programme begins is displayed. When AirDry opens the door, the display shows the remaining time of the running programme. An alarm code appears when the appliance has a malfunction. Do not try to close the appliance door within 2 minutes after automatic opening. If children have access to the appliance, it is advised to deactivate AirDry. You need to provide the product number code (PNC number) of your appliance when contacting an Authorised Service Centre. The PNC number can be found on the rating plate on the appliance door or on the display. You can set the automatic selection of the most recently used programme and options. Make sure that the current level of the water softener agrees with the hardness of the water supply before first use.
• Page 14: Fill the rinse aid dispenser. Open the water tap. Start the programme Quick to remove any residuals from the manufacturing process. Do not use detergent and do not put dishes in the baskets. The appliance recharges the resin in the water softener for up to 5 minutes. Use rough salt designed for dishwashers only. The salt is used to recharge the resin in the water softener. Only use rinse aid designed specifically for dishwashers. Fill the dispenser until the rinse aid reaches the marking MAX. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.
• Page 15: Close the lid and ensure it locks into position. Fill the rinse aid dispenser when the indicator is clear. Open the water tap before starting the appliance. Fill the salt container if it is empty. Load the baskets and add the detergent. Select and start a programme, then close the water tap when complete. The basket is automatically locked on the upper level. Do not sit on the rack or apply excessive pressure on the locked basket. Ensure items do not exceed the maximum load capacity of 18 kg. The ComfortLift mechanism allows easy loading and unloading of dishes.
• Page 16: Using the detergent How to select and start a programme using MY TIME selection bar Slide your finger across MY TIME selection bar to choose a suitable programme. The light related to the selected programme is on. The ECOMETER indicates the level of energy and water consumption. The display shows the programme duration. Only use detergent specifically designed for dishwashers. How to activate EXTRAS Put the detergent (gel, powder or tablets) in the compartment. For information about the detergent dosage, refer to the manufacturer's instructions on the packaging of the product.
• Page 17: How to start the AUTO Sense program Opening the door while the appliance operates may affect the energy consumption and the programme duration. The appliance senses the type of load and adjusts a suitable wash cycle. How to delay the start of a programme If you cancel the delay start, you have to select the programme again. How to cancel a running programme Make sure that there is detergent in the detergent dispenser before you start a new programme. The Auto Off function saves energy by switching the appliance off when it is not operating. When the programme is complete, the display shows Dishes clean. Opening the door while a programme is running pauses the wash cycle. During the countdown, you cannot change the delay time and the programme selection. If you open the door during the delay start countdown, the countdown is paused.
• Page 18: The Auto Off function switches the appliance off automatically. Follow the hints below to ensure optimal cleaning and drying results in daily use and to protect the environment. Only use salt, rinse aid and detergent designed for dishwasher. Other products can cause damage to the appliance. Washing dishes in the dishwasher usually consumes less water and energy than washing dishes by hand. Load the dishwasher to its full capacity to save water and energy. In areas with hard water, use basic dishwasher detergent, rinse aid and salt separately for optimal results. Detergent tablets do not fully dissolve with short programmes; use tablets with long programmes to prevent residues. Do not pre-rinse dishes by hand as it increases water and energy consumption. Always use the correct quantity of detergent to avoid poor cleaning results and residues on dishes. Select a programme according to the type of load and the degree of soil for efficient water and energy consumption.
• Page 19: the indicator Start the Machine Care programme to clean the appliance interior. If unable to remove the foreign objects, contact an Authorised Service Centre. How to start the Machine Care programme: Disassemble the filters system as instructed. Remove any foreign objects manually. Reassemble the filters as instructed. Before starting the Machine Care programme, clean the filters and spray arms. Use a descaler or a cleaning product designed specifically for dishwashers. Clean the appliance with a moist soft cloth. Only use neutral detergents. Check the filters and the sump after each use of the dishwasher.
• Page 20: Put back the filter in the flat filter. Remove the filter out of the filter. Remove the flat filter. An incorrect position of the filters can cause bad washing results and damage to the appliance. Wash the filters. We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. To remove the lower spray arm, pull it upwards. Make sure that there are no residues of food or soil in or around the edge of the sump. Wash the spray arm under running water.
• Page 21: To install the spray arm back, press it downwards. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place. We recommend to clean the upper spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. We recommend to clean the ceiling spray arm regularly to prevent soil from clogging the holes. Pull out the upper basket. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. The ceiling spray arm is placed on the ceiling of the appliance. The spray arm is installed in the delivery tube with the mounting element. Wash the spray arm under running water.
• Page 22: Wash the spray arm under running water. Use a thin pointed tool to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside. Release the stoppers on the sides of the sliding rails of the cutlery drawer and pull the drawer out. To install the spray arm back, insert the mounting element in the spray arm and fix it in the delivery tube by turning it clockwise. Make sure that the mounting element locks into place. Install the cutlery drawer on the sliding rails and block the stoppers. Move the upper basket to the lowest level to reach the spray arm more easily. Improper repair of the appliance may pose a danger to the safety of the user. Any repairs must be performed by qualified personnel.
• Page 23: Problem and alarm code You cannot activate the appliance. Make sure that the mains plug is connected to the mains socket. The programme does not start. Make sure that the appliance door is closed. The appliance does not fill with water. Make sure that the water tap is open. The appliance does not drain the water. Make sure that the sink spigot is not clogged. The display shows Error i30 and Risk of flood detected. Malfunction of the wash pump or the drain pump.
• Page 24: Problem and alarm code Possible cause and solution Technical malfunction of the appliance. The level of water inside the appliance is too high. The appliance stops and starts more times during operation. The programme lasts too long. The displayed programme duration is different than the duration in the consumption values table. The remaining time in the display increases and skips nearly to the end of the programme duration. Small leak from the appliance door. The appliance door is difficult to close.
• Page 25: Problem and alarm code The appliance is switched on but does not operate. Power supply is out of the operating range. The appliance switches off during operation. Complete power outage. Deactivate and activate the appliance if the problem occurs again. We do not recommend using the appliance until the problem has been completely fixed. For alarm codes not described in the table, contact an Authorised Service Centre. The dishwashing and drying results are not satisfactory. Poor washing results may require more intensive washing programmes. Activate the ExtraPower option to improve washing results.
• Page 26: Problem Possible cause and solution There are stains and dry water drops on glasses and dishes. The released quantity of rinse aid is not sufficient. Adjust the rinse aid dosage to a higher level. The quality of the rinse aid can be the cause. The interior of the appliance is wet. This is not a defect of the appliance. Humidity condenses on the appliance walls. Unusual foam during washing. Use the detergent designed specifically for dishwashers. Traces of rust on cutlery. There is too much salt in the water used for washing. Silver and stainless steel cutlery were placed together. There are residues of detergent in the dispenser at the end of the programme. The detergent tablet was stuck in the dispenser and was not washed away by water. Make sure that the spray arms are not blocked or clogged. Odours inside the appliance. Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the tableware, on the tub and on the inside of the door. The level of salt is low, check the refill indicator. Your tap water is hard. Use salt and set regeneration of the water softener even when multi-functional tablets are used. Dull, discoloured or chipped tableware. Make sure that only dishwasher-safe items are washed in the appliance.
• Page 27: Refer to Before first use, Daily use, or Hints and tips for other possible causes. Technical information includes dimensions, voltage, electrical connection, frequency, water supply pressure, and capacity. The dimensions are width 596 mm, height 818 - 898 mm, and depth 550 mm. The voltage is 200 - 240 V with a frequency of 50 - 60 Hz. Water supply pressure ranges from 0.5 to 10 bar (0.05 - 1.0 MPa). The appliance has a capacity for 14 place settings. Refer to the rating plate for other values. Using hot water from alternative energy sources can decrease energy consumption. The QR code on the energy label provides a link to the EU EPREL database. Recycle materials and dispose of waste responsibly to protect the environment and human health.
• Page 28: Page 28