AEG FFB53627ZM Dishwasher
12
Regeneration process
Each performed softener rinse (possible
more than one in the same cycle) may
prolong the programme duration by
another 5 minutes when it occurs at any
point at the beginning or in the middle of
a programme.
For the correct water softener operation,
the resin of the softener device needs to
be regenerated regularly. This process is
automatic and is the part of the normal
dishwasher operation.
When the prescribed quantity of water
(see values in the table) has been used
since the previous regeneration process,
a new regeneration process will be
initiated between the final rinse and the
programme end.
All the consumption values
mentioned in this section are
determined in line with the
currently applicable standard
in laboratory conditions with
water hardness 2.5mmol/L
(water softener: level 3)
according to the regulation:
2019/2022 .
Water softener lev‐ Amount of water
el
(l)
250
100
62
47
25
17
10
5
The pressure and the
1
temperature of water as well
as the variations of the
mains supply can change
the values.
2
3
4
How to set the water softener
level
Make sure the appliance is in user mode.
5
6
1. Press Program.
7
•
•
•
The indicator
still flashes.
8
The remaining indicators are off.
The display shows the current
9
3
setting: e.g.
= level 5.
10
3
2. Press Program repeatedly to change
the setting.
In case of the high water softener setting,
it may occur also in the middle of the
programme, before the rinse (twice
during a programme). Regeneration
initiation has no impact on the cycle
duration, unless it occurs in the middle of
a programme or at the end of a
programme with a short drying phase. In
such cases, the regeneration prolongs
the total duration of a programme by
additional 5 minutes.
3. Press the on/off button to confirm the
setting.
7.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the final
rinse.
When the rinse aid chamber is empty,
the rinse aid indicator turns on. If the
drying results are satisfactory while using
multi-tablets only, you can deactivate the
notification for refilling the rinse aid.
However, for best drying performance,
always use rinse aid.
Subsequently, the rinsing of the water
softener that lasts 5 minutes may begin
in the same cycle or at the beginning of
the next programme. This activity
increases the total water consumption of
a programme by additional 4 litres and
the total energy consumption of a
programme by additional 2 Wh. The
rinsing of the softener ends with a
complete drain.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
| General | Details |
|---|---|
| Name | AEG FFB53627ZM Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.83 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
ZLINE Kitchen DWV Tallac Dishwasher
BOSCH SPI2HKS08E Dishwasher
BOSCH SPV4EMX21G Dishwasher
Thermador DWHD640EFM Dishwasher
IKEA RENODLAD Dishwasher
TOMADO TDW6001B Dishwasher
Bosch SMU4HTW02H-01 Dishwasher
stalgast 801350V06 Dishwasher
INVENTUM VVW6040AB Building Depot Dishwasher
BOSCH SHXM4AY55N Dishwasher