Home > AEG > AEG FSK83828P Fully Integrated Connected Comfortlift Dishwasher

AEG FSK83828P Fully Integrated Connected Comfortlift Dishwasher

Warning: this appliance is designed to be  
installed / connected to a grounding  
connection in the building.  
Make sure that the parameters on the  
rating plate are compatible with the  
electrical ratings of the mains power  
supply.  
Always use a correctly installed  
shockproof socket.  
Do not use multi-plug adapters and  
extension cables.  
Make sure not to cause damage to the  
mains plug and to the mains cable. Should  
the mains cable need to be replaced, this  
must be carried out by our Authorised  
Service Centre.  
Connect the mains plug to the mains  
socket only at the end of the installation.  
Make sure that there is access to the  
mains plug after the installation.  
Do not pull the mains cable to disconnect  
the appliance. Always pull the mains plug.  
This appliance is fitted with a 13 A mains  
plug. If it is necessary to change the mains  
plug fuse, use only a 13 A ASTA (BS  
1362) fuse (UK and Ireland only).  
WARNING!  
Dangerous voltage.  
2.4 Use  
Do not put flammable products or items  
that are wet with flammable products in,  
near or on the appliance.  
Dishwasher detergents are dangerous.  
Follow the safety instructions on the  
detergent packaging.  
Do not drink and play with the water in the  
appliance.  
Do not remove the dishes from the  
appliance until the programme is  
complete. Some detergent may remain on  
the dishes.  
Do not store items or apply pressure on  
the open door of the appliance.  
The appliance can release hot steam if  
you open the door while a programme  
operates.  
2.3 Water connection  
Do not cause damage to the water hoses.  
Before connection to new pipes, pipes not  
used for a long time, where repair work  
has been carried out or new devices fitted  
(water meters, etc.), let the water flow until  
it is clean and clear.  
Ensure that there are no visible water  
leaks during and after the first use of the  
appliance.  
2.5 Service  
To repair the appliance contact the  
Authorised Service Centre. Use original  
spare parts only.  
Please note that self-repair or non-  
professional repair can have safety  
consequences and might void the  
guarantee.  
The following spare parts will be available  
for 7 years after the model has been  
discontinued: motor, circulation and drain  
pump, heaters and heating elements,  
including heat pumps, piping and related  
equipment including hoses, valves, filters  
and aquastops, structural and interior  
parts related to door assemblies, printed  
circuit boards, electronic displays,  
pressure switches, thermostats and  
sensors, software and firmware including  
If the water inlet hose is damaged,  
immediately close the water tap and  
disconnect the mains plug from the mains  
socket. Contact the Authorised Service  
Centre to replace the water inlet hose.  
Without electrical power, the water  
protection system is not active. In this  
case there is a risk of flooding.  
The water inlet hose has a safety valve  
and a sheath with an inner mains cable.  
ENGLISH  
5
GeneralDetails
NameAEG FSK83828P Fully Integrated Connected Comfortlift Dishwasher
MakeAEG
LanguageEnglish
FiletypePDF (Download)
File size1.27 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
AEG FFE83800PM Dishwasher

AEG FSK83828P Fully Integrated Connected Comfortlift Dishwasher