AEG FSK83828P Fully Integrated Connected Comfortlift Dishwasher
Problem and alarm code
Possible cause and solution
Rattling or knocking sounds from
the inside of the appliance.
•
The tableware is not properly arranged in the baskets. Refer to basket
loading leaflet.
•
•
Make sure that the spray arms can rotate freely.
The appliance trips the circuit-beak‐
er.
The amperage is insufficient to supply simultaneously all the applian‐
ces in use. Check the socket amperage and the capacity of the meter
or turn off one of the appliances in use.
•
•
Internal electrical fault of the appliance. Contact an Authorised Service
Centre.
The appliance is switched on but
does not operate.
The display shows PF.
Power supply is out of the operating range. The wash cycle is tempora‐
rily interrupted and resumes automatically once the power is restored.
The appliance switches off during
operation.
•
•
Complete power outage. The wash cycle is temporarily interrupted and
resumes automatically once the power is restored.
The display shows upd. All buttons
are inactive except for the on/off
button.
The appliance downloads and installs the firmware update automatical‐
ly when it is available. The display shows upd for the duration of the
updating process. Wait for the process to be complete. If you interrupt
the update process by deactivating the appliance, it resumes when you
activate the appliance.
The firmware update does not change the appliance performance dec‐
laration values.
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
The PNC can be found on the rating plate on
the appliance door. You can also check the
PNC on the control panel.
Before checking the PNC, make sure the
appliance is in the programme selection.
For alarm codes not described in the table,
contact an Authorised Service Centre.
1. Press and hold simultaneously
and
WARNING!
for about 3 seconds.
The display shows the PNC of your
appliance.
We do not recommend using the
appliance until the problem has been
completely fixed. Unplug the appliance
and do not plug it in again until you are
certain that it operates correctly.
2. To exit the PNC presentation, press and
hold simultaneously
about 3 seconds.
and
for
The appliance returns to the programme
selection.
13.1 The product number code
(PNC)
If you contact an Authorised Service Centre,
you need to provide the product number code
of your appliance.
ENGLISH 29
| General | Details |
|---|---|
| Name | AEG FSK83828P Fully Integrated Connected Comfortlift Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.27 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
AMANA ADB1400AMS Undercounter Dishwasher
FISHER PAYKEL DD60D2HNX9 Built Under Dishwasher
smeg DI4522 Dishwasher
INSIGNIA NS-DWH1SS9 Dishwasher
FISHER PAYKEL DD60SCTX9 Dishwasher
BOSCH SBV4EVX08E65 Dishwasher
Indesit 869991713220 Dishwasher
Haier HDW13F0B1 Dishwasher
kleenmaid DW6020XB Black /Built Under Dishwasher
FISHER PAYKEL DD60ST4NX9 Single Dishwasher