AEG FSK83828P Fully Integrated Connected Comfortlift Dishwasher
Problem and alarm code
Possible cause and solution
The anti-flood device is on.
The display shows i30.
•
•
•
Close the water tap.
Make sure that the appliance is correctly installed.
Make sure the baskets are loaded as instructed in the user manual.
Malfunction of the water level detec‐
tion sensor.
The display shows i41 - i44.
•
•
Make sure that the filters are clean.
Switch the appliance off and on.
Malfunction of the wash pump or the
•
Switch the appliance off and on.
drain pump.
The display shows i51 - i59 or i5A -
i5F.
The temperature of the water inside
the appliance is too high or malfunc‐
tion of the temperature sensor oc‐
curred.
•
•
Make sure that the temperature of the inlet water does not exceed
60°C.
Switch the appliance off and on.
The display shows i61 or i69.
Technical malfunction of the appli‐
ance.
The display shows iC0 or iC3.
•
Switch the appliance off and on.
The level of water inside the appli‐
ance is too high.
The display shows iF1.
•
•
•
Switch the appliance off and on.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right height above the
floor. Refer to the installation instructions.
Network unit error.
•
•
•
Contact an Authorised Service Centre.
The display shows iC4 or iC5.
The appliance stops and starts
more times during operation.
It is normal. It provides optimal cleaning results and energy savings.
The programme lasts too long.
If the delay start option is set, cancel the delay setting or wait for the
end of the countdown.
•
•
Activating options increases the programme duration.
The displayed programme duration
is different than the duration in the
consumption values table.
Refer to the consumption values table in the chapter "Programme se‐
lection".
The remaining time in the display in‐
creases and skips nearly to the end
of the programme duration.
•
This is not a defect. The appliance is working correctly.
Small leak from the appliance door.
•
•
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
The appliance door is not centred on the tub. Adjust the rear foot (if ap‐
plicable).
The appliance door is difficult to
close.
•
The appliance is not levelled. Loosen or tighten the adjustable feet (if
applicable).
•
•
Parts of the tableware are protruding from the baskets.
The appliance door opens during
the wash cycle.
The AirDry function is activated. You can deactivate the function. Refer
to "Basic settings".
28 ENGLISH
| General | Details |
|---|---|
| Name | AEG FSK83828P Fully Integrated Connected Comfortlift Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.27 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
FISHER PAYKEL DD60D4HZB9 Dishwasher
BOSCH SMS2HKW66G 12 Place Settings Dishwasher
Whirlpool WDF560SAF Undercounter Dishwasher
BOSCH SMS6ZCI10G Dishwasher
Midea MDF18A1AWW Dishwasher
FISHER PAYKEL DD24DDFTX9 N Dishwasher
Smeg ST3-9AG Dishwasher
EQUATOR ADVANCED Appliances WB 24 in. 14 place Dishwasher
Electrolux EEC67310L Dishwasher
BOSCH SMV4EB804E Fully Integrated Dishwasher