Home > AEG > AEG FSK93847P Dishwasher

AEG FSK93847P Dishwasher

18  
8.5 How to start the AUTO  
Sense program  
Opening the door while the  
appliance operates may  
affect the energy  
1. Press  
.
consumption and the  
programme duration.  
The light related to the button is  
on.  
The display shows the longest  
possible program duration.  
If the door is opened for  
more than 30 seconds  
during the drying phase, the  
running programme ends. It  
does not happen if the door  
is opened by the AirDry  
function.  
2. Close the appliance door to start the  
program.  
The appliance senses the type of load  
and adjusts a suitable wash cycle.  
During the cycle, the sensors operate  
several times and the initial program  
duration can decrease.  
8.8 How to cancel the delay  
start while the countdown  
operates  
8.6 How to delay the start of a  
programme  
1. Select a programme.  
Press and hold  
for about 3 seconds.  
2. Press  
repeatedly until the display  
The appliance returns to the programme  
selection.  
shows the desired delay time (from 1  
to 24 hours).  
If you cancel the delay start,  
you have to select the  
programme again.  
The light related to the button is on.  
3. Close the appliance door to start the  
countdown.  
During the countdown, you cannot  
change the delay time and the  
programme selection.  
8.9 How to cancel a running  
programme  
When the countdown is complete, the  
programme starts.  
Press and hold  
The appliance returns to the programme  
selection.  
for about 3 seconds.  
8.7 Opening the door while  
the appliance operates  
Make sure that there is  
detergent in the detergent  
dispenser before you start a  
new programme.  
Opening the door while a programme is  
running pauses the wash cycle. The  
display shows the remaining duration of  
the programme. The programme bar at  
the bottom of the display indicates the  
current progress of the wash cycle. The  
length of the bar decreases along with  
the programme duration. After closing  
the door, the wash cycle resumes from  
the point of interruption.  
8.10 The Auto Off function  
This function saves energy by switching  
the appliance off when it is not operating.  
The function comes into operation  
automatically:  
When the programme is completed.  
After 5 minutes if a programme was  
not started.  
If you open the door during the delay  
start countdown, the countdown is  
paused. The display shows the current  
countdown status. After closing the door,  
the countdown resumes.  
8.11 End of the programme  
When the programme is complete, the  
display shows Dishes clean.  
GeneralDetails
NameAEG FSK93847P Dishwasher
MakeAEG
LanguageEnglish
FiletypePDF (Download)
File size1.06 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
AEG FFE83800PM Dishwasher

AEG FSK93847P Dishwasher