Home > architecto > architecto SPV5939st Dishwasher

architecto SPV5939st Dishwasher

Step 4. Dishwasher installation steps  
For other installation steps please see the installation instruction draw-  
ings  
1. Place the condensation strip under the cabinet worktop. Make sure  
that the condensation strip is flush with the edge of the worktop. (Step  
2).  
2. Connect the water supply hose to the cold water tap.  
3. Connect the water drainage hose.  
4. Connect the power supply cord.  
5. Place the dishwasher in place. (Step 4)  
6. Level the dishwasher. The rear feet can be adjusted from the front of  
the dishwasher by using the wrench to turn the hex screw in the centre  
of the dishwasher base. In order to adjust the front feet, use a flat head  
screwdriver and rotate the front feet until the dishwasher is level.  
7. Attach the furniture door to the dishwasher door.  
8. Adjust the tension of the door springs using the Allen key. Tighten  
the spring to the left. Failure to make the adjustments can damage the  
dishwasher.  
9. The dishwasher must be fixed. This can be done in two ways:  
A. MDF Worktop: Insert the mounting hook into the hole on the side  
panel and fix it to the worktop with screws.  
B. Worktop made of marble or granite: Attach the side with the screw.  
*In selected dishwasher models there are gaskets to be installed around  
the appliance (optional).  
NOTE: Always ensure that there is a sufficient gap between metal furni-  
ture components such as handles, fittings, furniture fronts and the sur-  
face of the control panel buttons. If the gap is insufficient, functions may  
be triggered inadvertently and the dishwasher may malfunction.  
- 82 -  
GeneralDetails
Namearchitecto SPV5939st Dishwasher
Makearchitecto
LanguageEnglish
FiletypePDF (Download)
File size2.53 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

architecto SPV5939st Dishwasher