ASKO DFI766UXXL.AU Dishwasher
Care and cleaning
Remove blockages
Unblocking the drainage pump
If the dishwasher still contains water after the program has finished, something may be blocking the
drainage pump, which results in the error message Water outlet fault or BLDC drain pump fault.
1.
Turn the machine off using and remove the plug from the wall socket.
2. Remove the coarse filter and the fine filter.
3. Scoop out the water from the dishwasher tub.
4. In order to inspect the drainage pump, remove the yellow drainage pump stop on the right in
the bottom drain. (Use a pair of pliers if necessary.)
5. Turn the pump wheel located behind the drainage pump stop by hand. Carefully remove any
items.
6. Refit the drainage pump stop along with the fine and coarse filters.
7. Plug the machine in again.
Drainage pump
stop
NOTE!
Do not forget to refit the drainage pump stop.
Unblocking the inlet hose filter
If the water supply contains small particles, the outer filter on the inlet hose may become blocked,
which results in the Water inlet fault error message.
1.
Turn the machine off using and remove the plug from the wall socket.
2. Turn off the water tap.
3. Unscrew the inlet hose.
4. Carefully remove the outer filter from the inlet hose and clean it.
5. Refit the filter and check that the gasket is correctly positioned.
6. Screw the inlet hose firmly into place.
35
| General | Details |
|---|---|
| Name | ASKO DFI766UXXL.AU Dishwasher |
| Make | ASKO |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.67 MB |

ASKO DSD5444D Dishwasher

ASKO DFI8557MMXXL Dishwasher

ASKO DBI565IXXLS Logic Series 24 Dishwasher

ASKO DFI5558MKXXL Dishwasher

ASKO DFI777UXXL Dishwasher

ASKO D5636XXL Dishwasher

ASKO DFI544D Dishwasher

ASKO DFI7602MMXXL Dishwasher

ASKO DBI343ID.W.AU Dishwasher

ASKO D5233 Dishwasher































































