Home > Beko > beko DUT25401WHW Front Pocket Handle Dishwasher

beko DUT25401WHW Front Pocket Handle Dishwasher

3

DUT25401WHW

Front Control, Pocket Handle Dishwasher, 5 Programs, 48 dBA, Hardwired

22⁷/16"

23⁹/16"

(570mm)

24"

(598mm)

(610mm)

34"Min.

(864mm)

23 ⁵/8"Min.

35¹⁵/16"Max.

33 ⁷/8"– 35 ⁷/8"

(600mm) –

(913mm)

(861 – 911mm)

24"Max.

(610mm)

30¹/8"

(765mm)

7¹¹/16"

(195mm)

3⁵/16"(100mm)

3⁷/8"

(99mm)

(toe-kick)

23⁹/16"

1³/4"

(598mm)

(45mm)

4⁵/8"

(118mm)

HARDWIRE INSTALLATION

Direct connect box is shipped

attached to the dishwasher.

Free of

Pipes or Wires

2” - 3”

(51mm - 76mm)

(102mm)

Plumbing and Electric

in this area

3/8” - 1/2”

(10mm - 13mm)

(152mm)

Electrical supply cords must be a

minimum #14AWG copper wire.

The dishwasher is designed for

an electrical supply of 120 V, 60

Hz, AC, connected to a dedicated,

properly grounded electrical

circuit with a fuse or breaker rated

for 15 amperes.

Remove 2" - 3" (51mm–76mm) of

house line wire from its outer casing

and then remove 3/8"–1/2" (10mm -

13mm) of insulation from each wire.

NOTE TO THE INSTALLER: All height, width, and depth dimensions are shown in inches (as well as metric). Beko U.S., Inc. reserves the absolute and unrestricted right to change product materials and

speciﬁcations, at any time, without notice. Please visit our website, www.BekoAppliances.com, or call 888.352.2356 to verify the latest speciﬁcations with ﬁnal dimensional data and other details prior to

installation and making a cutout. Applicable product limited warranty information may be found in accompanying product materials, or you may contact your account manager for further details. Proper installation

is the responsibility of the installer. Product failure due to improper installation is not covered under the Limited Warranty.

8 8 8 . 3 5 2 . B E KO ( 2 3 5 6 )

b e k o . c o m / e n - u s

Page 3 of 3