BOSCH SHE53C82WH Dishwasher
en-usꢀInstallation Procedure
1. Attach elbow joint to the water inlet valve with the open
end facing towards the direction of the sink, either to the
left or the right. . Turn by hand and do not over tighten
.
4.2ꢀVisual Leak Check
1. Temporarily hook up water supply under the sink by
going through the front of the sink cabinet. Do not turn
on the power or push the dishwasher into the niche.
2. Turn the water on and check for leaks at the water inlet
hose connection on the back of the dishwasher.
4.3ꢀPre-level the Dishwasher
Set the dishwasher to the correct height before it goes into
the cabinet.
2. Attach hot water line to elbow.
1. Measure the height of the cabinet opening.
2. Raise the front of the dishwasher to approximately 1/2"
lower than the height of the opening by turning the feet
clockwise.
‒ You can raise the rear foot after the unit is in the
cabinet opening.
3. Use two wrenches to tighten, using one to stabilize and
avoid putting stress on the water inlet valve.
The maximum height the unit can be raised to is 34.5"
(867.3 mm)
8
| General | Details |
|---|---|
| Name | BOSCH SHE53C82WH Dishwasher |
| Make | Bosch |
| Language | English |
| Filetype | PDF (Download) |
| File size | 4.33 MB |

BOSCH SMV6ZCX49E-39 Dishwasher

BOSCH SMI4HVS33E Dishwasher

BOSCH SRV2HKX39G Dishwasher

BOSCH SGS4HAW40G Dishwasher

BOSCH SGH4HVX32G Dishwasher

BOSCH SMS4ECI26E Dishwasher

BOSCH SMS6EDI02G Free-Standing Dishwasher

BOSCH SMS6EDW02G Free-Standing Dishwasher

BOSCH SMV4HTX27G Dishwasher

BOSCH SMV4HCX48E Dishwasher

































































